ExpressRouteGateway - effective routes (virtual hub)
Is there a way to get effective routes via API for express route gateway deployed in virtual hub ?
Azure Virtual WAN
Azure Virtual WAN - ExpressRoute Gateway traffic flow
Hello, I'm trying to better understand the traffic flow in an Azure Virtual WAN (vWAN) setup that includes ExpressRoute. When inspecting the ExpressRoute route table, I notice a BGP peer IP that falls within the Virtual Hub address space—for example,…
Azure Virtual WAN
How to enable inter hub communication between two hubs in single Azure Virtual WAN?
I have one Azure Virtual WAN and two hubs in this VWAN. Each hub is connected to respective virtual networks. By default without any setting VMs in both regions are communicating without any problem. The moment I introduce two azure firewalls in each…
Azure Virtual WAN
Increase Memory of Virtual Appliance
We have 8000v router appliance for SDWAN setup, and due to memory over usage, we need to increase it. please help me to know how to do if its possible.
Azure Virtual WAN
BGP with Azure Virtual Wan NVA
How to Check BGP logs in Virtual Hub for BGP Session with an NVA ?
Azure Virtual WAN
can not connect server on premises via Azure Firewall in KC vHUB
Tenant: lge.com (5069cde4-642a-45c0-8094-d0c2dec10be3) Subscription: LGE-MGMT (96ec6c81-b0fe-4eaf-8cce-c93374f4da83) VNet: vnet-kc-thinq10-dev, 10.123.24.0/25 Subnet: sbn-kc-thinq10-dev-pri, 10.123.24.64/26 NSG: nsg-vnet-kc-thinq10-dev Virtual WAN:…
Azure Virtual WAN
Azure Virtual WAN
I have a vWAN with 2 hubs ( hub-1 & hub-2). I have ER Circuit deployed in hub-1. All works well except that VNETs that are peered to hub2 don't see prefixing from expressRoute. The same is for prefixes coming from VPN - they are not propagated to…
Azure Virtual WAN
VirtualWANhub stuck in 'provisioning' state and I cannot delete the resource.
Trying to delete a resource. Resource = Virtual WAN There is a hub listed that I cannot delete. Routing status: Provisioning Hub Status: Failed I get the following error: "Failed to delete resource(s) Failed to delete resource…
Azure Virtual WAN
Cannot Create User VPN Configuration in UAE North Region
I have a virtual WAN in the uaenorth region. I want to create a user VPN configuration in the vWAN. However, I keep getting this Error: The provided location 'uaenorth' is not available for resource type 'Microsoft.Network/vpnServerConfigurations'. I…
Azure Virtual WAN
Info about custom routing and UDRs with Azure Firewall and VPN gateway transit in a hub & spoke model
Hi everyone, I have configured an architecture in my lab as follows: From the left in the hub network I deployed an Azure Firewall because all traffic must go through. The hub network on the right is on another Subscription, specifically…
Azure Virtual WAN
Azure VPN Gateway
Azure Firewall
Azure Virtual Network
Azure Network Watcher
Error using StorageSasUrl parameter in Get-AzVirtualWanVpnConfiguration command
An issue is occurring when attempting to export VPN information from an Azure Virtual WAN using the PowerShell command Get-AzVirtualWanVpnConfiguration. The command is executed with the parameters VirtualWan, StorageSasUrl, and VpnSite. A storage account…
Azure Virtual WAN


Effective routes - routeServiceVip as nexthop IP
I have set up a vWAN and on the VNET I see the routes with nexthop set to routeServiceVip. What is this IP and why sometimes the nexthop is set to VPN gateway private IP address and sometimes this IP is used ?
Azure Virtual WAN
Integrate Cisco SDWAN OnRamp for MultiCloud with a Cisco FTDv pair at the edge of the Azure environment
I am trying to add Azure to my Cisco SDWAN environment using Cisco's OnRamp for MultiCloud. I also need packets inspection (both directions) by Cisco FTDvs (pair) configured between Azure load balancers (LB). So ingress traffic should flow as such: vWAN…
Azure Virtual WAN
What does the routing-weight parameter do when configuring an Azure Virtual WAN VPN Connection?
When configuring a VPN Gateway connection, either via Azure CLI, Bicep, or Terraform, it is possible to configure the routing weight. I have not found any documentation as to what this does? I was hoping that it would allow me to configure a preferred…
Azure Virtual WAN
Issue with Meraki vMX Connectivity in Azure VW
Hello, We have an existing Virtual WAN (VWAN) in our subscription, which includes a Virtual Hub (VHUB) with four virtual connections. Recently, we added a new VHUB in South UK and connected a test Virtual Network (VNet) to it. Our goal is to add multiple…
Azure Virtual WAN
Azure Vwan migration away from Meraki
My current environment is a mesh network with Meraki routers and a vmx in Azure which uses route tables to route all the traffic in specific subnets to the Meraki VMX in another subnet on in the same vnet. My goal is to move the Azure Vwan solution. I…
Azure Virtual WAN
Virtual hub is not enabled to allow Router ASN modification. Please set ASN to 65515 or contact Support for enabling virtual hub to allow modification
Hi, Testing with with NVA’s and azure virtual wan and want to set each hub with it’s on asn other than the default 65515. It seems it is possible but also that support is the only one that can do this ? { "code":…
Azure Virtual WAN


How to configure a VM in Spoke in a HUB & SPOKE Cisco-SD-WAN Solution to use Site to site VPN tunnel using cisco FTDv to reach a partner on prem server
How to configure a VM in Spoke in a HUB & SPOKE Cisco-SD-WAN Solution to use Site to site VPN tunnel using cisco FTDv to reach a partner on prem server
Azure Virtual WAN

vwan route map not working as expected
My configuration (POC) is like this. I have a VWAN with 2 VNETs 10.30.96.0/19 10.30.224.0/19 A P2S VPN with address pool 172.24.10.0/24 My Windows Laptop with Azure VPN client configured using downloaded hub vpn profile. Standard everything as…
Azure Virtual WAN
vwan route map not working when multiple route replace maps with comma seperated
My configuration (POC) is like this. I have a VWAN with 2 VNETs 10.30.96.0/19 10.30.224.0/19 A P2S VPN with address pool 172.24.10.0/24 My Windows Laptop with Azure VPN client configured using downloaded hub vpn profile I am testing route map…