Rename-NetIPHttpsConfiguration
Renames an IP-HTTPS profile.
Syntax
ByPolicyStore (Default)
Rename-NetIPHttpsConfiguration
-NewName <String>
[-Profile <String[]>]
[-ProfileActivated <Boolean[]>]
[-PolicyStore <String>]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByGpoSession
Rename-NetIPHttpsConfiguration
-NewName <String>
[-Profile <String[]>]
[-ProfileActivated <Boolean[]>]
[-GPOSession <String>]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
InputObject (cdxml)
Rename-NetIPHttpsConfiguration
-InputObject <CimInstance[]>
-NewName <String>
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Rename-NetIPHttpsConfiguration cmdlet renames an IP-HTTPS profile, either on a computer or in a Group Policy Object (GPO).
Examples
Example 1: Rename an IP-HTTPS profile using a configuration object
PS C:\>$config = Get-NetIPHttpsConfiguration -PolicyStore "testdomain\GPOName"
PS C:\> Rename-NetIPHttpsConfiguration -InputObject $config
This set of commands uses the Get-NetIPHttpsConfiguration cmdlet to get an IP-HTTPS configuration object and stores it in a variable named $config. The contents of the variable are then passed to this cmdlet.
Example 2: Rename an IP-HTTPS profile
PS C:\>Rename-NetIPHttpsConfiguration -Profile "Redmond" -NewName "Fareast"
This command renames the IP-HTTPS profile named Redmond to Fareast.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-GPOSession
Specifies the Group Policy session which contains the IP-HTTPS configuration to rename.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByGpoSession
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
Parameter properties
| Type: | CimInstance[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
InputObject (cdxml)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NewName
Specifies the new name for the IP-HTTPS profile.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PolicyStore
Specifies the policy store that contains the configuration profile to rename. The acceptable values for this parameter are:
- GPO
To rename the configuration profile of a GPO, specify the GPO name using the following format: Domain\GPOName
You cannot use this parameter with the GPOSession parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByPolicyStore
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Profile
Specifies the name of the profile to rename.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IPHttpsProfile |
Parameter sets
ByPolicyStore
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
ByGpoSession
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-ProfileActivated
Specifies which profile to rename.
Parameter properties
| Type: | Boolean[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByPolicyStore
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
ByGpoSession
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
This cmdlet accepts no input objects.
Outputs
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
When the Passthru parameter is specified, this cmdlet outputs a modified Windows Management Instrumentation (WMI) object.