New-NetIPHttpsConfiguration
Creates an IP-HTTPS configuration.
Syntax
ByPolicyStore (Default)
New-NetIPHttpsConfiguration
[-PolicyStore] <String>
-ServerURL <String>
[-Profile <String>]
[-Type <Type>]
[-State <State>]
[-AuthMode <AuthMode>]
[-StrongCRLRequired <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
ByGpoSession
New-NetIPHttpsConfiguration
[-GPOSession] <String>
-ServerURL <String>
[-Profile <String>]
[-Type <Type>]
[-State <State>]
[-AuthMode <AuthMode>]
[-StrongCRLRequired <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The New-NetIPHttpsConfiguration cmdlet creates an IP-HTTPS configuration.
This cmdlet can create IP-HTTPS configurations on the ActiveStore, PersistentStore, or Group Policy Objects (GPOs).
Examples
Example 1: Create an IP-HTTPS configuration
PS C:\>New-NetIPHttpsConfiguration -Profile "Redmond" -ServerURL "https://contoso.com:443/IPHTTPs" -PolicyStore "Domain\TestGPO"
This command creates an IP-HTTPS configuration named Redmond with the specified server URL https://contoso.com:443/IPHTTPs in the GPO named TestGPO.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AuthMode
Specifies the authentication mode of the IP-HTTPS configuration.The acceptable values for this parameter are:
- None. Performs no client authentication during the SSL handshake. This is the default value.
- Certificates. Uses client certificates to authenticate clients. This authentication mode applies only to a server interface on a computer running Windows Server® 2012 or Windows Server 2016.
Parameter properties
| Type: | AuthMode |
| Default value: | None |
| Accepted values: | None, Certificates |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-GPOSession
Specifies the Group Policy session in which to store the configuration information.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByGpoSession
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PolicyStore
Specifies the policy store to which to add the configuration profile. The acceptable values for this parameter are:
- ActiveStore
- PersistentStore
- GPO
To add the configuration profile to a GPO, specify the GPO name using the following format: Domain\GPOName
You cannot use this parameter with the GPOSession parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByPolicyStore
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Profile
Specifies the name by which to identify the IP-HTTPS configuration profile. This option is only available if the store is a GPO.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | IPHttpsProfile |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ServerURL
Specifies the URL for the server. If the profile is a client profile, Windows Server 2012 or Windows Server 2016 attempts to connect to the server URL. If the profile is a server profile, then this is the URL on which the server listens.
Specify the server URL using the following format: https://myserver/IPHTTPS
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-State
Specifies the state behavior of IP-HTTPS. The acceptable values for this parameter are:
- Default:
---- For a server interface, IP-HTTPS is always configured.
---- For a client interface, IP-HTTPS is configured on-demand based on the other connectivity options available. Client interfaces are created with this setting by default.
Enabled. IP-HTTPS is always configured, for both server interfaces and client interfaces. Server interfaces are created with this setting by default.
Disabled. Disables the IP-HTTPS interface.
OutsideEnabled. IP-HTTPs is configured on-demand whenever the computer is outside of the corporate network.
Parameter properties
| Type: | State |
| Default value: | None |
| Accepted values: | Default, Enabled, Disabled, OutsideEnabled |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-StrongCRLRequired
Indicates if a strong certificate revocation list (CRL) check is required before a connection.
By default, the value of this parameter is $False.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Type
Specifies if IP-HTTPS should start in server mode or client mode. Server mode is only allowed on Windows Server 2012.
Parameter properties
| Type: | Type |
| Default value: | None |
| Accepted values: | Client, Server |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
This cmdlet accepts no input objects.
Outputs
Object
This cmdlet returns an object.