Partager via

Guide pratique pour créer une forme à l’aide d’un StreamGeometry

StreamGeometry est une alternative légère à PathGeometry pour créer des formes géométriques. Utilisez un StreamGeometry lorsque vous devez décrire une géométrie complexe, mais que vous ne voulez pas supporter la charge liée à la liaison de données, à l'animation ou à la modification. Par exemple, en raison de son efficacité, la classe StreamGeometry constitue un bon choix pour décrire des ornements.

Créer une géométrie de flux triangulaire

L’exemple suivant utilise la syntaxe d’attribut pour créer une StreamGeometry triangulaire en XAML.

<Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
  <StackPanel>
  
    <Path Data="F0 M10,100 L100,100 100,50Z" 
      StrokeThickness="1" Stroke="Black"/>

  </StackPanel>
</Page>

Pour plus d’informations sur la syntaxe de l'attribut StreamGeometry, consultez la page Syntaxe de balisage de chemin d'accès.

Utiliser un StreamGeometry pour définir un triangle

L’exemple suivant utilise un StreamGeometry pour définir un triangle dans le code. Tout d’abord, l’exemple crée un StreamGeometry, puis obtient un StreamGeometryContext et l’utilise pour décrire le triangle.

using System;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Media;
using System.Windows.Shapes;

namespace SDKSample
{
    // Use StreamGeometry with StreamGeometryContext to define a triangle shape.
    public partial class StreamGeometryTriangleExample : Page
    {
        public StreamGeometryTriangleExample()
        {
            // Create a path to draw a geometry with.
            Path myPath = new Path();
            myPath.Stroke = Brushes.Black;
            myPath.StrokeThickness = 1;

            // Create a StreamGeometry to use to specify myPath.
            StreamGeometry geometry = new StreamGeometry();
            geometry.FillRule = FillRule.EvenOdd;

            // Open a StreamGeometryContext that can be used to describe this StreamGeometry
            // object's contents.
            using (StreamGeometryContext ctx = geometry.Open())
            {

                // Begin the triangle at the point specified. Notice that the shape is set to
                // be closed so only two lines need to be specified below to make the triangle.
                ctx.BeginFigure(new Point(10, 100), true /* is filled */, true /* is closed */);

                // Draw a line to the next specified point.
                ctx.LineTo(new Point(100, 100), true /* is stroked */, false /* is smooth join */);

                // Draw another line to the next specified point.
                ctx.LineTo(new Point(100, 50), true /* is stroked */, false /* is smooth join */);
            }

            // Freeze the geometry (make it unmodifiable)
            // for additional performance benefits.
            geometry.Freeze();

            // Specify the shape (triangle) of the Path using the StreamGeometry.
            myPath.Data = geometry;

            // Add path shape to the UI.
            StackPanel mainPanel = new StackPanel();
            mainPanel.Children.Add(myPath);
            this.Content = mainPanel;
        }
    }
}


Imports System.Windows
Imports System.Windows.Controls
Imports System.Windows.Media
Imports System.Windows.Shapes

Namespace SDKSample
    ' Use StreamGeometry with StreamGeometryContext to define a triangle shape.
    Partial Public Class StreamGeometryTriangleExample
        Inherits Page
        Public Sub New()
            ' Create a path to draw a geometry with.
            Dim myPath As New Path()
            myPath.Stroke = Brushes.Black
            myPath.StrokeThickness = 1

            ' Create a StreamGeometry to use to specify myPath.
            Dim geometry As New StreamGeometry()
            geometry.FillRule = FillRule.EvenOdd

            ' Open a StreamGeometryContext that can be used to describe this StreamGeometry 
            ' object's contents.
            Using ctx As StreamGeometryContext = geometry.Open()

                ' Begin the triangle at the point specified. Notice that the shape is set to 
                ' be closed so only two lines need to be specified below to make the triangle.
                ctx.BeginFigure(New Point(10, 100), True, True) ' is closed  -  is filled 

                ' Draw a line to the next specified point.
                ctx.LineTo(New Point(100, 100), True, False) ' is smooth join  -  is stroked 

                ' Draw another line to the next specified point.
                ctx.LineTo(New Point(100, 50), True, False) ' is smooth join  -  is stroked 
            End Using

            ' Freeze the geometry (make it unmodifiable)
            ' for additional performance benefits.
            geometry.Freeze()

            ' Specify the shape (triangle) of the Path using the StreamGeometry.
            myPath.Data = geometry

            ' Add path shape to the UI.
            Dim mainPanel As New StackPanel()
            mainPanel.Children.Add(myPath)
            Me.Content = mainPanel
        End Sub
    End Class
End Namespace

Créer une forme géométrique dans le code

L’exemple suivant crée une méthode qui utilise un StreamGeometry et StreamGeometryContext pour définir une forme géométrique basée sur des paramètres spécifiés.

using System;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Media;
using System.Windows.Shapes;

namespace SDKSample
{
    public partial class StreamGeometryExample : Page
    {
        public StreamGeometryExample()
        {
            // Create a path to draw a geometry with.
            Path myPath = new Path();
            myPath.Stroke = Brushes.Black;
            myPath.StrokeThickness = 1;

            // Create a StreamGeometry to use to specify myPath.
            StreamGeometry theGeometry = BuildRegularPolygon(new Point(200, 200), 200, 8, 0);
            theGeometry.FillRule = FillRule.EvenOdd;

            // Freeze the geometry (make it unmodifiable)
            // for additional performance benefits.
            theGeometry.Freeze();

            // Use the StreamGeometry returned by the BuildRegularPolygon to
            // specify the shape of the path.
            myPath.Data = theGeometry;

            // Add path shape to the UI.
            StackPanel mainPanel = new StackPanel();
            mainPanel.Children.Add(myPath);
            this.Content = mainPanel;
        }

        StreamGeometry BuildRegularPolygon(Point c, double r, int numSides, double offsetDegree)
        {
            // c is the center, r is the radius,
            // numSides the number of sides, offsetDegree the offset in Degrees.
            // Do not add the last point.

            StreamGeometry geometry = new StreamGeometry();

            using (StreamGeometryContext ctx = geometry.Open())
            {
                double step = 2 * Math.PI / Math.Max(numSides, 3);
                Point cur = c;

                double a = Math.PI * offsetDegree / 180.0;
                for (int i = 0; i < numSides; i++, a += step)
                {
                    cur.X = c.X + r * Math.Cos(a);
                    cur.Y = c.Y + r * Math.Sin(a);
                    if (i == 0)
                        ctx.BeginFigure(cur, true /* is filled */, true /* is closed */);
                    else
                        ctx.LineTo(cur, true /* is stroked */, false /* is smooth join */);
                }
            }

            return geometry;
        }
    }
}


Imports System.Windows
Imports System.Windows.Controls
Imports System.Windows.Media
Imports System.Windows.Shapes

Namespace SDKSample
    Partial Public Class StreamGeometryExample
        Inherits Page
        Public Sub New()
            ' Create a path to draw a geometry with.
            Dim myPath As New Path()
            myPath.Stroke = Brushes.Black
            myPath.StrokeThickness = 1

            ' Create a StreamGeometry to use to specify myPath.
            Dim theGeometry As StreamGeometry = BuildRegularPolygon(New Point(200, 200), 200, 8, 0)
            theGeometry.FillRule = FillRule.EvenOdd

            ' Freeze the geometry (make it unmodifiable)
            ' for additional performance benefits.
            theGeometry.Freeze()

            ' Use the StreamGeometry returned by the BuildRegularPolygon to 
            ' specify the shape of the path.
            myPath.Data = theGeometry

            ' Add path shape to the UI.
            Dim mainPanel As New StackPanel()
            mainPanel.Children.Add(myPath)
            Me.Content = mainPanel
        End Sub

        Private Function BuildRegularPolygon(ByVal c As Point, ByVal r As Double, ByVal numSides As Integer, ByVal offsetDegree As Double) As StreamGeometry
            ' c is the center, r is the radius,
            ' numSides the number of sides, offsetDegree the offset in Degrees.
            ' Do not add the last point.

            Dim geometry As New StreamGeometry()

            Using ctx As StreamGeometryContext = geometry.Open()

                Dim [step] As Double = 2 * Math.PI / Math.Max(numSides, 3)
                Dim cur As Point = c

                Dim a As Double = Math.PI * offsetDegree / 180.0
                Dim i As Integer = 0

                For i = 0 To numSides - 1
                    cur.X = c.X + r * Math.Cos(a)
                    cur.Y = c.Y + r * Math.Sin(a)
                    If i = 0 Then
                        ctx.BeginFigure(cur, True, True) ' is closed  -  is filled 
                    Else
                        ctx.LineTo(cur, True, False) ' is smooth join  -  is stroked 
                    End If
                    a += [step]
                Next

            End Using

            Return geometry
        End Function
    End Class
End Namespace

Voir aussi