Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This header is used by nfpdrivers. For more information, see:
winsmcrd.h contains the following programming interfaces:
IOCTLs
| IOCTL_SMARTCARD_EJECT The IOCTL_SMARTCARD_EJECT request ejects the currently inserted smart card from the smart card reader. |
| IOCTL_SMARTCARD_GET_ATTRIBUTE The IOCTL_SMARTCARD_GET_ATTRIBUTE control code queries for smart card attributes. |
| IOCTL_SMARTCARD_GET_LAST_ERROR The IOCTL_SMARTCARD_GET_LAST_ERROR request retrieves the error code of the most previous operation because there is no option to return an error code immediately after an overlapped operation is complete. |
| IOCTL_SMARTCARD_GET_STATE The IOCTL_SMARTCARD_GET_STATE control code gets the current status of the smart card. |
| IOCTL_SMARTCARD_IS_ABSENT The IOCTL_SMARTCARD_IS_ABSENT control code returns immediately with STATUS_SUCCESS if no smart card is currently detected. |
| IOCTL_SMARTCARD_IS_PRESENT The IOCTL_SMARTCARD_IS_PRESENT control code detects whether a smart card is currently detected. |
| IOCTL_SMARTCARD_POWER Windows may require a driver to have this IOCTL to be NOP and return success. |
| IOCTL_SMARTCARD_SET_ATTRIBUTE The IOCTL_SMARTCARD_SET_ATTRIBUTE control code sets an attribute and returns STATUS_SUCCESS on SCARD_ATTR_DEVICE_IN_USE; otherwise, it returns STATUS_NOT_SUPPORTED. |
| IOCTL_SMARTCARD_SET_PROTOCOL Sets the procotol the driver communicates to the smart card with after the card is detected. |
| IOCTL_SMARTCARD_SWALLOW The IOCTL_SMARTCARD_SWALLOW request causes the smart card reader to swallow the card. |
| IOCTL_SMARTCARD_TRANSMIT Transmits data from the client to the detected smart card in ISO7816-4 compliant APDU. |
Structures
| SCARD_IO_REQUEST This structure is used to identify a smart card I/O request. |