Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This test verifies the following conditions are satisfied:
A digital media renderer (DMR) includes digital media player (DMP) capabilities.
The DMP finds an item with multiple <res> elements.
The DMP selects an A/V or an Audio resource in streaming mode, or the DMP selects an Image resource in interactive mode.
The DMP connects to a DMS under ideal network conditions.
If the above conditions are met, the DMP selects a <res> element according to the following procedures:
Audio Class
If the server exposes a non-transcoded resource with a Profile ID that matches one of the Profile IDs advertised by the DMP/DMR device, then the DMP device must select this resource.
If the DMP does not support the Profile ID for the non-transcoded resource, the DMP must select a transcoded resource with a supported Profile ID and play this resource.
A/V Class
If the server exposes a non-transcoded resource with a Profile ID that matches one of the Profile IDs advertised by the DMP/DMR device, then the DMP device must select this resource.
If the DMP does not support the Profile ID for the non-transcoded resource, the DMP must select a transcoded resource with a supported Profile ID and play this resource.
Image Class
The DMP device must select a <res> element for an image with a resolution of 1920x1080 or smaller. There is one exception: a DMP device may select an image resource with a resolution higher than 1920x1080 if the DMP can display the image within 2 seconds.
The 2 seconds are measured from the moment the user selects an image to the moment the image is displayed on the screen.
Test details
Associated requirements |
Device.Media.DMR.Base.DMPSelectionOfAdvertisedResources |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows 8 (x64) Windows 8 (x86) Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~6 minutes |
Categories |
Experiences |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Digital Media Renderer Testing Prerequisites.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Media Testing.
More information
Parameters
| Parameter | Description |
|---|---|
WDKData_DeviceUUID |
The Device ID |
Command syntax
| Command option | Description |
|---|---|
NetMediaLogoTests.exe NETMEDIA_0120 /dmrID=[Query WDKData_DeviceUUID] |
Runs the test. |
Note
For command-line help for this test binary, type /h.
File list
| File | Location |
|---|---|
NetMediaLogoTests.exe |
<testbinroot>\nttest\multimediatest\sharing\netmedialogotests |