Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This test validates that sensors will enter and leave power states at the appropriate time.
Test details
Associated requirements |
Device.Input.Sensor.Base.Discretional |
Platforms |
Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~2 minutes |
Categories |
Basic |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Sensor Device Testing Prerequisites.
If this test is being run against a GPS sensor device node, make sure that you are running the test in an environment in which you can receive a GPS signal.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Input Testing.
A GPS signal is required if the sensor under test is GPS.
You must enable all location privacy settings.
Close all apps and services that use sensors before running the test.