New-CsBandwidthPolicyServiceConfiguration
Creates a new bandwidth policy service configuration. This cmdlet was introduced in Lync Server 2010.
Syntax
Default (Default)
New-CsBandwidthPolicyServiceConfiguration
[-Identity] <XdsIdentity>
[-EnableLogging <Boolean>]
[-LogCleanUpInterval <TimeSpan>]
[-MaxLogFileSizeMb <UInt32>]
[-MaxTokenLifetime <TimeSpan>]
[-Force]
[-InMemory]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
Call admission control (CAC) is a way of determining whether to allow real-time communications sessions, such as voice or video calls, to be established based on bandwidth constraints. Within the Skype for Business Server implementation of CAC, regions, sites, and subnets are defined within a network along with the relationships and links between those entities in order to place bandwidth constraints between them. Bandwidth Policy service is the component that performs CAC functionality in the Skype for Business Server deployment, enabling the decision as to whether sufficient bandwidth exists for a call to be established. This cmdlet configures a new bandwidth policy service at the site level.
Examples
EXAMPLE 1
New-CsBandwidthPolicyServiceConfiguration -Identity site:Redmond
This example creates a new bandwidth policy service configuration at the site Redmond (-Identity site:Redmond).
No other parameters are specified, so the defaults are used for all configuration values.
EXAMPLE 2
New-CsBandwidthPolicyServiceConfiguration -Identity site:Dublin -EnableLogging $True -LogCleanupInterval 30.00:00:00
In this example we again create a new bandwidth policy service configuration, this time for the Dublin site (-Identity site:Dublin).
For this site, rather than accepting the default values, we want to enable logging and set the number of days that pass before logs are cleaned up to 30 days.
We do this by passing a value of True ($True) to the EnableLogging parameter, and then passing a value of 30.00:00:00 to the parameter LogCleanupInterval.
The LogCleanupInterval value is a TimeSpan object, which is in the format dd.hh:mm:ss, where d is days, h is hours, m is minutes, and s is seconds.
Parameters
-Confirm
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
Prompts you for confirmation before executing the command.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnableLogging
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
Set this parameter to True to generate CAC failure and link status logs related to the bandwidth policy service.
Default: False
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Force
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
Suppresses any confirmation prompts that would otherwise be displayed before making changes.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
A unique identifier that contains the scope and name of the configuration. This configuration can be created only at the site scope, so the Identity will be in the following format: site:<site name>, where <site name> is the name of the site to which the configuration applies.
Parameter properties
| Type: | XdsIdentity |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 2 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-InMemory
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
Creates an object reference without actually committing the object as a permanent change. If you assign the output of this cmdlet called with this parameter to a variable, you can make changes to the properties of the object reference and then commit those changes by calling this cmdlet's matching Set-<cmdlet>.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LogCleanUpInterval
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
The period of time after which CAC failure and link status logs will be removed.
This value must be within the range 1 day through 60 days. The value must be entered in the format dd.hh:mm:ss, where d is days, h is hours, m is minutes, and s is seconds.
Default: 10 days (10.00:00:00)
Parameter properties
| Type: | TimeSpan |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaxLogFileSizeMb
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
The maximum size the log file is allowed to reach. The value for this parameter must be a positive number; it specifies the file size in megabytes.
Default: 3 (MB)
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaxTokenLifetime
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
The maximum amount of time the token issued by the Bandwidth Policy Authentication service will exist.
This value must be in the range 1 hour through 24 hours. The value must be entered in the format dd.hh:mm:ss, where d is days, h is hours, m is minutes, and s is seconds.
Default: 8 hours (08:00:00)
Parameter properties
| Type: | TimeSpan |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019
Describes what would happen if you executed the command without actually executing the command.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
Outputs
Microsoft.Rtc.Management.WritableConfig.Settings.BandwidthPolicyServiceConfiguration.BandwidthPolicyServiceConfiguration
Creates an object of type Microsoft.Rtc.Management.WritableConfig.Settings.BandwidthPolicyServiceConfiguration.BandwidthPolicyServiceConfiguration.