Set-NetVirtualizationCustomerRoute
Changes the metric value for virtual routes.
Syntax
ByName (Default)
Set-NetVirtualizationCustomerRoute
[-RoutingDomainID <String[]>]
[-VirtualSubnetID <UInt32[]>]
[-DestinationPrefix <String[]>]
[-NextHop <String[]>]
[-Metric <UInt32>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[<CommonParameters>]
InputObject (cdxml)
Set-NetVirtualizationCustomerRoute
-InputObject <CimInstance[]>
[-Metric <UInt32>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[<CommonParameters>]
Description
The Set-NetVirtualizationCustomerRoute cmdlet changes the metric value for virtual routes in a Microsoft® Hyper-V® Server 2016 virtual network. Network Virtualization allows for more than one virtual network to exist on the same physical network. Computers can exchange network traffic with a virtual machine by using a Customer Address in a virtual network. Network Virtualization uses the metric to select a preferred route from several possible routes. For more information, see Network Virtualization technical details on TechNet.
You can use the Get-NetVirtualizationCustomerRoute cmdlet to get routes to modify, or you can use any combination of the following values to specify which routes to modify:
- Destination prefix. A range of IP addresses as an IP prefix.
- Next hop. A next hop gateway for the specified destination addresses.
- Routing domain ID. An ID for a virtual network that can include multiple virtual subnets.
- Virtual subnet ID. An ID for a virtual subnet.
Examples
Example 1: Change a metric value
PS C:\>Set-NetVirtualizationCustomerRoute -DestinationPrefix "172.16.0.0/16" -Metric 3
This command changes the metric value to 3 for a Customer Route that has the specified destination prefix.
Example 2: Change a metric value for multiple Customer Routes
PS C:\>Get-NetVirtualizationCustomerRoute -NextHop "172.16.0.1" | Set-NetVirtualizationCustomerRoute -Metric 3
This command uses the Get-NetVirtualizationCustomerRoute to get all the Customer Routes that have a next hop gateway of 172.16.0.1. The command passes them by using the pipe operator to the Set-NetVirtualizationCustomerRoute cmdlet, which changes the metric value to 3 for those Customer Routes.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DestinationPrefix
Specifies an array of IP prefixes, as strings, for destination networks. You can specify IPv4 and IPv6 addresses. Use prefix notation: 0.0.0.0/0.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
Parameter properties
| Type: | CimInstance[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
InputObject (cdxml)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Metric
Specifies a new value for the metric of a route.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NextHop
Specifies an array of IP addresses for next hop gateways for routes.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RoutingDomainID
Specifies an array of IDs for routing domains. Routing domains use a GUID style ID: {11111111-2222-3333-4444-000000000000}.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-VirtualSubnetID
Specifies an array of IDs for virtual subnets. The acceptable values for this parameter are: integers from 4096 through 16777214.
Parameter properties
| Type: | UInt32[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.