Test-ActiveSyncConnectivity
This cmdlet is available only in on-premises Exchange.
Use the Test-ActiveSyncConnectivity cmdlet to test connectivity to Microsoft Exchange ActiveSync virtual directories.
Note: This cmdlet works best in Exchange 2010. In later versions of Exchange, the functionality of this cmdlet is replaced by Managed Availability. For the best results, use the Invoke-MonitoringProbe cmdlet and specify the relevant active monitor probe instead of using this cmdlet.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
Test-ActiveSyncConnectivity
[[-ClientAccessServer] <ServerIdParameter>]
[[-URL] <String>]
[-AllowUnsecureAccess]
[-Confirm]
[-DomainController <Fqdn>]
[-LightMode]
[-MailboxCredential <PSCredential>]
[-MailboxServer <ServerIdParameter>]
[-MonitoringContext]
[-MonitoringInstance <String>]
[-ResetTestAccountCredentials]
[-Timeout <UInt32>]
[-TrustAnySSLCertificate]
[-UseAutodiscoverForClientAccessServer]
[-WhatIf]
[<CommonParameters>]
Description
The Test-ActiveSyncConnectivity cmdlet tests Exchange ActiveSync connectivity by connecting to a specified Exchange ActiveSync virtual directory, to any Exchange ActiveSync virtual directories on a specified Exchange server, or to any Exchange ActiveSync virtual directories that are available in the local Active Directory site.
The first time you use this cmdlet, you might be required to create a test user. To create a test user, run the following command:
& $env:ExchangeInstallPath\Scripts\New-TestCasConnectivityUser.ps1
The test results are displayed on-screen. The cmdlet returns the following information.
- CasServer: The Exchange server that the client connected to.
- LocalSite: The name of the local Active Directory site.
- Scenario: The operations that are tested. Values are: Options, FolderSync, First Sync, GetItemEstimate, Sync Data, Ping, and Sync Test Item.
- Result: The values returned are typically Success, Skipped, or Failure.
- Latency(MS): The time required to complete the test in milliseconds.
- Error: Any error messages that were encountered.
You can write the results to a file by piping the output to ConvertTo-Html and Set-Content. For example: Test-ActiveSyncConnectivity -ClientAccessServer MBX01 | ConvertTo-Html | Set-Content -Path "C:\My Documents\EAS Test.html".
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Test-ActiveSyncConnectivity -ClientAccessServer MBX01
This example tests Exchange ActiveSync client connectivity for the server named MBX01.
Example 2
Test-ActiveSyncConnectivity -UseAutodiscoverForClientAccessServer $true -URL "https://contoso.com/mail" -MailboxCredential (Get-Credential pauls@contoso.com)
This example tests the Exchange ActiveSync connectivity for the mailbox PaulS using the Autodiscover URL.
Parameters
-AllowUnsecureAccess
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The AllowUnsecureAccess switch allows the test to continue over an unsecured channel that doesn't require Secure Sockets Layer (SSL). You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ClientAccessServer
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The ClientAccessServer parameter specifies the Exchange server to test. This server has the Client Access server role installed and is responsible for accepting client connections.
You can use any value that uniquely identifies the server. For example:
- Name
- Distinguished name (DN)
- ExchangeLegacyDN
- GUID
You can't use this parameter with the Url parameter.
Parameter properties
| Type: | ServerIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LightMode
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The LightMode switch tells the command to perform only a subset of the tests. You don't need to specify a value with this switch.
When you use this switch, only the Options test is run.
If you don't use this switch, the First Sync, GetItemEstimate, Sync Data, Ping and Sync Test Item tests are also run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MailboxCredential
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The MailboxCredential parameter specifies the mailbox credential to use for a single mailbox test.
A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.
Parameter properties
| Type: | PSCredential |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MailboxServer
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The MailboxServer parameter specifies the Exchange Mailbox server that you want to test. This parameter identifies the backend server that accepts proxied connections from the frontend server where clients connect.
You can use any value that uniquely identifies the server. For example:
- Name
- Distinguished name (DN)
- ExchangeLegacyDN
- GUID
If you don't use this parameter, connections to all Mailbox servers in the local Active Directory site are tested.
Parameter properties
| Type: | ServerIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MonitoringContext
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The MonitoringContext switch includes the associated monitoring events and performance counters in the results. You don't need to specify a value with this switch.
Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager (SCOM).
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MonitoringInstance
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The MonitoringInstance parameter specifies an identifier for this task when the test is run from Microsoft System Center Operations Manager (SCOM). This parameter is important because SCOM might run multiple instances of the test from the same server at the same time.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ResetTestAccountCredentials
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The ResetTestAccountCredentials switch resets the password for the test account that's used to run this command. You don't need to specify a value with this switch.
The password for the test account is typically reset every seven days. Use this switch to force a password reset any time it's required for security reasons.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Timeout
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The Timeout parameter specifies the amount of time (in seconds) to wait for a response from the command.
Parameter properties
| Type: | UInt32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TrustAnySSLCertificate
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The TrustAnySSLCertificate switch allows Exchange to accept certificates from untrusted certification authorities (CAs). You don't need to specify a value with this switch.
This switch is useful for testing internal URLs, because a URL that has an associated certificate is typically an external URL. This switch lets the task check an internal URL without generating an error when the certificate doesn't match the URL.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-URL
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The URL parameter specifies the URL that's used to connect to the Exchange ActiveSync virtual directory.
You can't use this parameter with the ClientAccessServer parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-UseAutodiscoverForClientAccessServer
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The UseAutodiscoverForClientAccessServer switch specifies whether the test should use the Autodiscover service to locate the Exchange ActiveSync virtual directory. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.