Set-OfflineAddressBook
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
Use the Set-OfflineAddressBook cmdlet to modify offline address book (OAB) settings.
In Exchange Online, this cmdlet is available only in the Address Lists role, and by default, the role isn't assigned to any role groups. To use this cmdlet, you need to add the Address Lists role to a role group (for example, to the Organization Management role group). For more information, see Add a role to a role group.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
Set-OfflineAddressBook
[-Identity] <OfflineAddressBookIdParameter>
[-AddressLists <AddressBookBaseIdParameter[]>]
[-ApplyMandatoryProperties]
[-ConfiguredAttributes <MultiValuedProperty>]
[-Confirm]
[-DiffRetentionPeriod <Unlimited>]
[-DomainController <Fqdn>]
[-FullOabDownloadPreventionThreshold <Int32>]
[-GeneratingMailbox <MailboxIdParameter>]
[-GlobalWebDistributionEnabled <Boolean>]
[-IsDefault <Boolean>]
[-MaxBinaryPropertySize <Int32>]
[-MaxMultivaluedBinaryPropertySize <Int32>]
[-MaxMultivaluedStringPropertySize <Int32>]
[-MaxStringPropertySize <Int32>]
[-Name <String>]
[-PublicFolderDistributionEnabled <Boolean>]
[-Schedule <Schedule>]
[-ShadowMailboxDistributionEnabled <Boolean>]
[-UpgradeFromE14]
[-UseDefaultAttributes]
[-Versions <MultiValuedProperty>]
[-VirtualDirectories <VirtualDirectoryIdParameter[]>]
[-WhatIf]
[-ZipOabFilesBeforeUploading <Boolean>]
[<CommonParameters>]
Description
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-OfflineAddressBook -Identity "Default Offline Address Book" -VirtualDirectories $null -GlobalWebDistributionEnabled $true
This example configures the OAB named Default Offline Address Book to be available for download requests from all OAB virtual directories in the organization.
Example 2
Set-OfflineAddressBook -Identity "\Default Offline Address Book" -GeneratingMailbox OABGen2
This example changes the organization mailbox that's responsible for generating the OAB.
Parameters
-AddressLists
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AddressLists parameter specifies the address lists or global address lists that are included in the OAB. You can use any value that uniquely identifies the address list. For example:
- Name
- Distinguished name (DN)
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
You can find the identify values of address lists and global address lists by using the Get-AddressList and Get-GlobalAddressList cmdlets.
Parameter properties
| Type: | AddressBookBaseIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ApplyMandatoryProperties
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ApplyMandatoryProperties switch specifies whether to update the mandatory properties of a legacy OAB. You don't need to specify a value with this switch.
This switch was used in coexistence environments when an OAB was migrated from Exchange 2003.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ConfiguredAttributes
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ConfiguredAttributes parameter specifies the recipient MAPI properties that are available in the OAB. This parameter uses the syntax: "Name1,Type1","Name2,Type2",..."NameN,TypeN" where Name is the name of the MAPI property (for example, MobileTelephoneNumber), and Type is the value ANR (ambiguous name resolution), Value, or Indicator.
To reset this parameter back to the default values, use the UseDefaultAttributes switch.
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DiffRetentionPeriod
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The DiffRetentionPeriod parameter specifies the number of days that the OAB difference files are stored on the server. Valid values are integers from 7 to 1825, or the value unlimited. The default value is 30.
Parameter properties
| Type: | Unlimited |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-FullOabDownloadPreventionThreshold
Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-GeneratingMailbox
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The GeneratingMailbox parameter specifies the arbitration mailbox where the OAB is generated. Specifically, the arbitration mailbox must contain the OrganizationCapabilityOABGen value for the PersistedCapability property. An arbitration mailbox with this capability is also known as an organization mailbox. You can use any value that uniquely identifies the mailbox. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Domain\Username
- Email address
- GUID
- LegacyExchangeDN
- SamAccountName
- User ID or user principal name (UPN)
The default value for this parameter is the organization mailbox named SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}.
A single organization mailbox can generate multiple OABs (you can use the same value for this parameter in the settings of multiple OABs), but in Exchange 2013 CU5 or later, an OAB can only be generated by a single organization mailbox (this parameter doesn't accept multiple values). To have a read only copy of the OAB (also known as a shadow copy) available in other organization mailboxes, use the ShadowMailboxDistributionEnabled parameter.
Parameter properties
| Type: | MailboxIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-GlobalWebDistributionEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The GlobalWebDistributionEnabled parameter specifies whether all OAB virtual directories in the organization can accept requests to download the OAB. These locations are advertised by the Autodiscover service. Valid values are:
- $true: Any OAB virtual directory in the organization can accept requests to download the OAB. You can't use this setting with the VirtualDirectories parameter.
- $false: Only the OAB virtual directories that are specified by the VirtualDirectories parameter accept requests to download the OAB. This value is the default.
In Exchange 2013 CU7 or later, we recommend that you use the value $true for this parameter. The Client Access services on any Mailbox server can proxy incoming OAB download requests to the correct location.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Identity parameter specifies the OAB that you want to modify. You can use any value that uniquely identifies the OAB. For example:
- Name or \Name
- Distinguished name (DN)
- GUID
Parameter properties
| Type: | OfflineAddressBookIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-IsDefault
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The IsDefault parameter specifies whether the OAB is used by all mailboxes and mailbox databases that don't have an OAB specified. Valid values are:
- $true: The OAB is the default OAB.
- $false: The OAB is isn't the default OAB.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaxBinaryPropertySize
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The MaxBinaryPropertySize parameter specifies the maximum size in bytes for binary attributes in the OAB before they're truncated. Valid values are integers from 0 to 999999999. The default value is 65536.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaxMultivaluedBinaryPropertySize
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The MaxMultivaluedBinaryPropertySize parameter specifies the maximum size in bytes for multivalued binary attributes in the OAB before they're truncated. Valid values are integers from 0 to 999999999. The default value is 65536 (64 kilobytes).
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaxMultivaluedStringPropertySize
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The MaxMultivaluedStringPropertySize parameter specifies the maximum size for multivalued string attributes in the OAB before they're truncated. Valid values are integers from 0 to 999999999. The default value is 65536 (64 kilobytes).
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaxStringPropertySize
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The MaxStringPropertySize parameter specifies the maximum size in bytes for string attributes before they're truncated. Valid values are integers from 0 to 999999999. The default value is 3400.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Name
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Name parameter specifies the unique name of the OAB. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PublicFolderDistributionEnabled
Applicable: Exchange Server 2010
This parameter is available only in Exchange Server 2010.
The PublicFolderDistributionEnabled parameter specifies whether the OAB is to be distributed via public folders. Setting the PublicFolderDistributionEnabled parameter to a value of $true sets the OAB to be distributed via public folders. The default value is $true.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Schedule
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
This parameter is functional only in Exchange 2010.
In Exchange 2013 or later, this parameter is no longer responsible for the OAB generation schedule. For more information, see Change the offline address book generation schedule in Exchange.
The Schedule parameter specifies the interval for generating the OAB in Exchange 2010 or earlier.
The syntax for this parameter is: StartDay.Hour:Minute [AM | PM]-EndDay.Hour:Minute [AM | PM].
You can use the following values for days:
- Full name of the day.
- Abbreviated name of the day.
- Integer from 0 through 6, where 0 = Sunday.
You can enter the time in 24 hour format and omit the AM/PM value. If you enter the time in 12 time hour format, include a space between the time and the AM/PM value.
You can mix and match date/time formats.
The start time and end time must be at least 15 minutes apart. Minutes are rounded down to 0, 15, 30, or 45.
Here are some examples:
- "Sun.11:30 PM-Mon.1:30 AM"
- "6.22:00-6.22:15" (Run from Saturday at 10:00 PM until Saturday at 10:15 PM.)
- "Sun.1:15 AM-Monday.23:00"
Note: In Exchange Online, the read only value of this property is displayed in Coordinated Universal Time (UTC).
Parameter properties
| Type: | Schedule |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ShadowMailboxDistributionEnabled
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The ShadowMailboxDistributionEnabled parameter specifies whether a read only copy of the OAB (also known as a shadow copy) is distributed to all other OAB generation mailboxes (also known as organization mailboxes). This allows additional Mailbox servers to be endpoints for requests to download the OAB, which can help prevent users from downloading the OAB across slow WAN links. Valid values are:
- $true: The OAB is distributed to all other organization mailboxes.
- $false: The OAB is isn't distributed to other organization mailboxes. This value is the default.
The value of this parameter is only meaningful if you have multiple organization mailboxes, and is only beneficial in Exchange organizations that have multiple Active Directory sites.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-UpgradeFromE14
Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-UseDefaultAttributes
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The UseDefaultAttributes switch specifies whether to revert the recipient MAPI properties that are available in the OAB to the default list. You don't need to specify a value with this switch.
You can use this switch to undo changes that you've made to the default list by using the ConfiguredAttributes parameter.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Versions
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Versions parameter specifies the OAB versions that are generated for client download. Valid values are:
- Version2 (requires public folder distribution)
- Version3 (requires public folder distribution)
- Version4 (default value in Exchange 2010 or later; the only available value in Exchange 2013 or later)
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-VirtualDirectories
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The VirtualDirectories parameter specifies the OAB virtual directories that accept requests to download the OAB. These locations are advertised in the Autodiscover service.
You can use any value that uniquely identifies the virtual directory. For example:
- Name or Server\Name
- Distinguished name (DN)
- GUID
The Name value uses the syntax "VirtualDirectoryName (WebsiteName)" from the properties of the virtual directory. You can specify the wildcard character (*) instead of the default website by using the syntax VirtualDirectoryName*.
The default value of this parameter is the Client Access services (frontend) and backend OAB virtual directories on the Mailbox server that holds the OAB generation mailbox (the GeneratingMailbox parameter or SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}) when you created the OAB (for example, Mailbox01\OAB (Default Web Site),Mailbox01\OAB (Exchange Back End).
To use this parameter, the value of the GlobalWebDistributionEnabled parameter must be $false.
In Exchange 2013 CU7 or later, we recommend that you set this parameter to $null, and then set the GlobalWebDistributionEnabled parameter to $true, because the Client Access services on any Mailbox server can proxy incoming OAB download requests to the correct location.
Parameter properties
| Type: | VirtualDirectoryIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ZipOabFilesBeforeUploading
Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ZipOabFilesBeforeUploading specifies whether to use ZIP file compression on the OAB files before uploading them to the server. Valid values are:
- $true: ZIP the OAB files.
- $false: Don't ZIP the OAB files. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.