Set-MailboxExportRequest
This cmdlet is available only in on-premises Exchange.
Use the Set-MailboxExportRequest cmdlet to change export request options after the request is created. You can use the Set-MailboxExportRequest cmdlet to recover from failed export requests.
This cmdlet is available only in the Mailbox Import Export role, and by default, the role isn't assigned to any role groups. To use this cmdlet, you need to add the Mailbox Import Export role to a role group (for example, to the Organization Management role group). For more information, see Add a role to a role group.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Rehome
Set-MailboxExportRequest
[-Identity] <MailboxExportRequestIdParameter>
[-RehomeRequest]
[-Confirm]
[-DomainController <Fqdn>]
[-RequestExpiryInterval <Unlimited>]
[-WhatIf]
[<CommonParameters>]
Identity
Set-MailboxExportRequest
[-Identity] <MailboxExportRequestIdParameter>
[-AcceptLargeDataLoss]
[-BadItemLimit <Unlimited>]
[-BatchName <String>]
[-CompletedRequestAgeLimit <Unlimited>]
[-Confirm]
[-DomainController <Fqdn>]
[-InternalFlags <InternalMrsFlag[]>]
[-LargeItemLimit <Unlimited>]
[-Priority <RequestPriority>]
[-RemoteCredential <PSCredential>]
[-RemoteHostName <Fqdn>]
[-RequestExpiryInterval <Unlimited>]
[-SkipMerging <SkippableMergeComponent[]>]
[-WhatIf]
[<CommonParameters>]
Description
You can pipeline the Set-MailboxExportRequest cmdlet from the Get-MailboxExportRequest cmdlet.
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-MailboxExportRequest -Identity "Ayla\MailboxExport1\" -BadItemLimit 10
This example changes the second export request Ayla\MailboxExport1 to accept up to 10 corrupt mailbox items.
Parameters
-AcceptLargeDataLoss
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The AcceptLargeDataLoss switch specifies the request should continue even if a large number of items in the source mailbox can't be copied to the target mailbox. You don't need to specify a value with this switch.
In Exchange 2013 or later, you need to use this switch if you set the LargeItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
In Exchange 2010, you need to use this switch if you set the BadItemLimit parameter to a value of 51 or higher. Otherwise, the command will fail.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-BadItemLimit
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The BadItemLimit parameter specifies the maximum number of bad items that are allowed before the request fails. A bad item is a corrupt item in the source mailbox that can't be copied to the target mailbox. Also included in the bad item limit are missing items. Missing items are items in the source mailbox that can't be found in the target mailbox when the request is ready to complete.
Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request will fail if any bad items are detected. If you are OK with leaving a few bad items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed. If too many bad items are detected, consider using the New-MailboxRepairRequest cmdlet to attempt to fix corrupted items in the source mailbox, and try the request again.
In Exchange 2010, if you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
Parameter properties
| Type: | Unlimited |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-BatchName
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The BatchName parameter specifies the name of the batch.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CompletedRequestAgeLimit
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The CompletedRequestAgeLimit parameter specifies how long the request is kept after it has completed before being automatically removed. The default value is 30 days.
Parameter properties
| Type: | Unlimited |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The Identity parameter specifies the identity of the export request. By default, export requests are named <alias>\MailboxExportX (where X = 0-9). If you specify a name for the export request, use the following syntax: Alias\Name.
Parameter properties
| Type: | MailboxExportRequestIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-InternalFlags
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The InternalFlags parameter specifies the optional steps in the request. This parameter is used primarily for debugging purposes.
Parameter properties
| Type: | InternalMrsFlag[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LargeItemLimit
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The LargeItemLimit parameter specifies the maximum number of large items that are allowed before the request fails. A large item is a message in the source mailbox that exceeds the maximum message size that's allowed in the target mailbox. If the target mailbox doesn't have a specifically configured maximum message size value, the organization-wide value is used.
For more information about maximum message size values, see the following topics:
- Exchange 2016: Message size limits in Exchange Server
- Exchange Online: Exchange Online Limits
Valid input for this parameter is an integer or the value unlimited. The default value is 0, which means the request fails if any large items are detected. If you are OK with leaving a few large items behind, you can set this parameter to a reasonable value (we recommend 10 or lower) so the request can proceed.
If you set this value to 51 or higher, you also need to use the AcceptLargeDataLoss switch. Otherwise, the command will fail.
Parameter properties
| Type: | Unlimited |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Priority
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The Priority parameter specifies the order in which the request should be processed in the request queue. Requests are processed in order, based on server health, status, priority, and last update time. Valid priority values are:
- Lowest
- Lower
- Low
- Normal: This value is the default.
- High
- Higher
- Highest
- Emergency
Parameter properties
| Type: | RequestPriority |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RehomeRequest
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The RehomeRequest switch tells the Microsoft Exchange Mailbox Replication service (MRS) that the request needs to be moved to the same database as the mailbox that's being exported. You don't need to specify a value with this switch.
This switch is used primarily for debugging purposes.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Rehome
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemoteCredential
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | PSCredential |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemoteHostName
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RequestExpiryInterval
Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The RequestExpiryInterval parameter specifies an age limit for a completed or failed request. When you use this parameter, the completed or failed request is automatically removed after the specified interval expires. If you don't use this parameter:
- The completed request is automatically removed based on the CompletedRequestAgeLimit parameter value.
- If the request fails, you need to manually remove it by using the corresponding Remove-*Request cmdlet.
To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.
When you use the value Unlimited, the completed request isn't automatically removed.
Parameter properties
| Type: | Unlimited |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SkipMerging
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The SkipMerging parameter specifies steps in the export that should be skipped. This parameter is used primarily for debugging purposes.
Parameter properties
| Type: | SkippableMergeComponent[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
Identity
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.