Set-InformationBarrierPolicy
This cmdlet is available only in Security & Compliance PowerShell. For more information, see Security & Compliance PowerShell.
Use the Set-InformationBarrierPolicy cmdlet to modify information barrier policies in the Microsoft Purview compliance portal.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
OrganizationSegmentsAllowed
Set-InformationBarrierPolicy
-Identity <PolicyIdParameter>
[-SegmentsAllowed <MultiValuedProperty>]
[-Comment <String>]
[-Confirm]
[-ModerationAllowed <Boolean>]
[-Force]
[-State <EopInformationBarrierPolicyState>]
[-WhatIf]
[<CommonParameters>]
OrganizationSegmentAllowedFilter
Set-InformationBarrierPolicy
-Identity <PolicyIdParameter>
[-SegmentAllowedFilter <String>]
[-Comment <String>]
[-Confirm]
[-Force]
[-ModerationAllowed <Boolean>]
[-State <EopInformationBarrierPolicyState>]
[-WhatIf]
[<CommonParameters>]
OrganizationSegmentsBlocked
Set-InformationBarrierPolicy
-Identity <PolicyIdParameter>
[-SegmentsBlocked <MultiValuedProperty>]
[-Comment <String>]
[-Confirm]
[-Force]
[-ModerationAllowed <Boolean>]
[-State <EopInformationBarrierPolicyState>]
[-WhatIf]
[<CommonParameters>]
Description
Information barrier policies are not in effect until you set them to active status, and then apply the policies:
- (If needed): Block communications between segments.
- After all of your policies are defined: Apply information barrier policies.
For more information, see Information barrier policies.
To use this cmdlet in Security & Compliance PowerShell, you need to be assigned permissions. For more information, see Permissions in the Microsoft Purview compliance portal.
Examples
Example 1
Set-InformationBarrierPolicy -Identity 43c37853-ea10-4b90-a23d-ab8c93772471 -State Active
This example activates the specified inactive information barrier policy.
Parameters
-Comment
Applicable: Security & Compliance
The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Security & Compliance
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Force
Applicable: Security & Compliance
The Force switch hides warning or confirmation messages. You don't need to specify a value with this switch.
You can use this switch to run tasks programmatically where prompting for administrative input is inappropriate.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Security & Compliance
The Identity parameter specifies the information barrier policy that you want to modify. You can use any value that uniquely identifies the policy. For example:
- Name
- Distinguished name (DN)
- GUID
Parameter properties
| Type: | PolicyIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 0 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-ModerationAllowed
Applicable: Security & Compliance
{{ Fill ModerationAllowed Description }}
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SegmentAllowedFilter
Applicable: Security & Compliance
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
OrganizationSegmentAllowedFilter
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SegmentsAllowed
Applicable: Security & Compliance
The SegmentsAllowed parameter specifies the segments that are allowed to communicate with the segment in this policy (users defined by the AssignedSegment parameter). Only these specified segments can communicate with the segment in this policy.
You identify the segment by its Name value. If the value contains spaces, enclose the value in quotation marks ("). You can specify multiple segments separated by commas ("Segment1","Segment2",..."SegmentN").
You can't use this parameter with the SegmentsBlocked parameter.
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
OrganizationSegmentsAllowed
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SegmentsBlocked
Applicable: Security & Compliance
The SegmentsBlocked parameter specifies the segments that aren't allowed to communicate with the segment in this policy (users defined by the AssignedSegment parameter). You can specify multiple segments separated by commas ("Segment1","Segment2",..."SegmentN").
You identify the segment by its Name value. If the value contains spaces, enclose the value in quotation marks ("). You can specify multiple segments separated by commas ("Segment1","Segment2",..."SegmentN").
You can't use this parameter with the SegmentsAllowed parameter.
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
OrganizationSegmentsBlocked
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-State
Applicable: Security & Compliance
The State parameter specifies whether the information barrier policy is active or inactive. Valid values are:
- Active
- Inactive
Parameter properties
| Type: | EopInformationBarrierPolicyState |
| Default value: | None |
| Accepted values: | Inactive, Active |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Security & Compliance
The WhatIf switch doesn't work in Security & Compliance PowerShell.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.