Set-EOPProtectionPolicyRule
This cmdlet is available only in the cloud-based service.
Use the Set-EOPProtectionPolicyRule cmdlet to modify rules associated with default email protections for all cloud mailboxes in preset security policies.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
Set-EOPProtectionPolicyRule
[-Identity] <RuleIdParameter>
[-Comments <String>]
[-Confirm]
[-ExceptIfRecipientDomainIs <Word[]>]
[-ExceptIfSentTo <RecipientIdParameter[]>]
[-ExceptIfSentToMemberOf <RecipientIdParameter[]>]
[-Name <String>]
[-Priority <Int32>]
[-RecipientDomainIs <Word[]>]
[-SentTo <RecipientIdParameter[]>]
[-SentToMemberOf <RecipientIdParameter[]>]
[-WhatIf]
[<CommonParameters>]
Description
For more information about preset security policies in PowerShell, see Preset security policies in Exchange Online PowerShell.
Important
Different types of recipient conditions use AND logic (the recipient must satisfy all specified conditions). Different types of recipient exceptions use OR logic (the recipient must satisfy any of the specified exceptions). For more information, see Profiles in preset security policies.
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-EOPProtectionPolicyRule -Identity "Standard Preset Security Policy" -ExceptIfSentToMemberOf "Test Group1","Test Group2"
This example provides exceptions to EOP protections in the Standard preset security policy for members of the specified groups.
Example 2
Set-EOPProtectionPolicyRule -Identity "Standard Preset Security Policy" -SentTo $null -ExceptIfSentTo $null -SentToMemberOf $null -ExceptIfSentToMemberOf $null -RecipientDomainIs $null -ExceptIfRecipientDomainIs $null
This example removes all conditions and exceptions from the Standard preset security policy. No restrictions are placed on who the Defender for Office 365 protections apply to.
Parameters
-Comments
Applicable: Exchange Online, Exchange Online Protection
The Comments parameter specifies informative comments for the rule, such as what the rule is used for or how it has changed over time. The length of the comment can't exceed 1024 characters.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Online, Exchange Online Protection
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
- Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExceptIfRecipientDomainIs
Applicable: Exchange Online, Exchange Online Protection
The ExceptIfRecipientDomainIs parameter specifies an exception that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.
Parameter properties
| Type: | Word[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExceptIfSentTo
Applicable: Exchange Online, Exchange Online Protection
The ExceptIfSentTo parameter specifies an exception that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExceptIfSentToMemberOf
Applicable: Exchange Online, Exchange Online Protection
The ExceptIfSentToMemberOf parameter specifies an exception that looks for messages sent to members of groups. You can use any value that uniquely identifies the group. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
If you remove the group after you create the rule, no exception is made for messages that are sent to members of the group.
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Exchange Online, Exchange Online Protection
The Identity parameter specifies the rule that you want to view. You can use any value that uniquely identifies the rule. For example:
- Name
- Distinguished name (DN)
- GUID
By default, the available rules (if they exist) are named Standard Preset Security Policy and Strict Preset Security Policy.
Parameter properties
| Type: | RuleIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 0 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Name
Applicable: Exchange Online, Exchange Online Protection
The Name parameter specifies a unique name for the rule. The maximum length is 64 characters.
By default, the rules are named Standard Preset Security Policy or Strict Preset Security Policy. We highly recommend that you use the default rule names for clarity and consistency.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Priority
Applicable: Exchange Online, Exchange Online Protection
The Priority parameter specifies a priority value for the rule that determines the order of rule processing. A lower integer value indicates a higher priority, the value 0 is the highest priority, and rules can't have the same priority value.
The default value for the rule that's associated with the Strict preset security policy is 0, and the default value for the rule that's associated with the Standard preset security policy is 1.
You must use the default value for the rule.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RecipientDomainIs
Applicable: Exchange Online, Exchange Online Protection
The RecipientDomainIs parameter specifies a condition that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.
Parameter properties
| Type: | Word[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SentTo
Applicable: Exchange Online, Exchange Online Protection
The SentTo parameter specifies a condition that looks for recipients in messages. You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SentToMemberOf
Applicable: Exchange Online, Exchange Online Protection
The SentToMemberOf parameter specifies a condition that looks for messages sent to members of distribution groups, dynamic distribution groups, or mail-enabled security groups. You can use any value that uniquely identifies the group. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
If you remove the group after you create the rule, no action is taken on messages that are sent to members of the group.
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Online, Exchange Online Protection
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.