Set-CalendarProcessing
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
Use the Set-CalendarProcessing cmdlet to modify calendar processing options for resource mailboxes, which include the Calendar Attendant, resource booking assistant, and calendar configuration. This cmdlet is effective only on resource mailboxes.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
Set-CalendarProcessing
[-Identity] <MailboxIdParameter>
[-AddAdditionalResponse <Boolean>]
[-AdditionalResponse <String>]
[-AddNewRequestsTentatively <Boolean>]
[-AddOrganizerToSubject <Boolean>]
[-AllBookInPolicy <Boolean>]
[-AllowConflicts <Boolean>]
[-AllowRecurringMeetings <Boolean>]
[-AllRequestInPolicy <Boolean>]
[-AllRequestOutOfPolicy <Boolean>]
[-AutomateProcessing <CalendarProcessingFlags>]
[-BookingType <ResourceBookingType>]
[-BookingWindowInDays <Int32>]
[-BookInPolicy <RecipientIdParameter[]>]
[-Confirm]
[-ConflictPercentageAllowed <Int32>]
[-DeleteAttachments <Boolean>]
[-DeleteComments <Boolean>]
[-DeleteNonCalendarItems <Boolean>]
[-DeleteSubject <Boolean>]
[-DomainController <Fqdn>]
[-EnableAutoRelease <Boolean>]
[-EnableResponseDetails <Boolean>]
[-EnforceCapacity <Boolean>]
[-EnforceSchedulingHorizon <Boolean>]
[-ForwardRequestsToDelegates <Boolean>]
[-IgnoreDefaultScope]
[-MaximumConflictInstances <Int32>]
[-MaximumDurationInMinutes <Int32>]
[-MinimumDurationInMinutes <Int32>]
[-OrganizerInfo <Boolean>]
[-PostReservationMaxClaimTimeInMinutes <Int32>]
[-ProcessExternalMeetingMessages <Boolean>]
[-RemoveCanceledMeetings <Boolean>]
[-RemoveForwardedMeetingNotifications <Boolean>]
[-RemoveOldMeetingMessages <Boolean>]
[-RemovePrivateProperty <Boolean>]
[-RequestInPolicy <RecipientIdParameter[]>]
[-RequestOutOfPolicy <RecipientIdParameter[]>]
[-ResourceDelegates <RecipientIdParameter[]>]
[-ScheduleOnlyDuringWorkHours <Boolean>]
[-TentativePendingApproval <Boolean>]
[-WhatIf]
[<CommonParameters>]
Description
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-CalendarProcessing -Identity "Conf 212" -AutomateProcessing AutoAccept -DeleteComments $true -AddOrganizerToSubject $true -AllowConflicts $false
This example automates the processing of calendar requests to the resource mailbox Conf 212.
Example 2
Set-CalendarProcessing -Identity "Car 53" -AutomateProcessing None
This example disables automatic processing for the resource mailbox Car 53.
Example 3
Set-CalendarProcessing -Identity "5th Floor Conference Room" -AutomateProcessing AutoAccept -AllBookInPolicy $true
This example allows the Calendar Attendant to approve in-policy requests from all users.
Example 4
Set-CalendarProcessing -Identity "5th Floor Conference Room" -AutomateProcessing AutoAccept -AllRequestInPolicy $true -AllBookInPolicy $false -ResourceDelegates "chris@contoso.com","michelle@contoso.com"
This example allows all users to submit in-policy requests, but the request is still subject to approval by one of the specified delegates.
Example 5
Set-CalendarProcessing -Identity "Room 221" -AutomateProcessing AutoAccept -RequestOutOfPolicy DavidPelton@contoso.com -ResourceDelegates "chris@contoso.com","michelle@contoso.com"
This example allows the Calendar Attendant to accept out-of-policy requests from David Pelton. The request is still subject to approval by one of the specified delegates.
Example 6
Set-CalendarProcessing -Identity "Car 53" -AutomateProcessing AutoAccept -BookInPolicy "ayla@contoso.com","tony@contoso.com" -AllBookInPolicy $false
This example allows a list of users to submit in-policy meeting requests to the equipment mailbox for Car 53.
The users you specify for the BookInPolicy using this syntax overwrite any existing values.
Example 7
$CurrentBIP = (Get-CalendarProcessing -Identity "Conference Room 1").BookInPolicy
$AddToBIP = "shiraz@contoso.com","chris@contoso.com"
$UpdatedBIP = $CurrentBIP + $AddToBIP
Set-CalendarProcessing -Identity "Conference Room 1" -BookInPolicy $UpdatedBIP
This example adds Shiraz and Chris to the BookInPolicy of the room mailbox named Conference Room 1 without affecting any existing BookInPolicy values.
The first command retrieves the current BookInPolicy values of Conference Room 1 and stores them in a variable.
The next two commands identify the new users to add to the BookInPolicy, combine the old and new values, and store the updated list a variable.
The last command updates the BookInPolicy value with the combined list.
Example 8
$group = New-DistributionGroup "Room 221 Booking Allowed"
Update-DistributionGroupMember -Identity $group.Identity -Members karina@contoso.com,tony@contoso.com -BypassSecurityGroupManagerCheck:$true
Set-CalendarProcessing -Identity "Room 221" -AutomateProcessing AutoAccept -BookInPolicy $group.Identity -AllBookInPolicy $false
This example rejects meeting requests from any user who isn't a member of the "Room 221 Booking Allowed" distribution group.
Example 9
Set-CalendarProcessing -Identity "Room 221" -ProcessExternalMeetingMessages $false
This example rejects meeting requests from any user who isn't a member of the Exchange organization.
Parameters
-AddAdditionalResponse
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AddAdditionalResponse parameter specifies whether additional information (the value of the AdditionalResponse parameter) is added to meeting request responses. Valid values are:
- $true: Text from the AdditionalResponse parameter is added to meeting request responses.
- $false: No additional text is added to meeting request responses (any text in the AddAdditionalResponse parameter isn't used). This value is the default.
This parameter is used only on resource mailboxes where the AutomateProcessing parameter is set to AutoAccept.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AdditionalResponse
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AdditionalResponse parameter specifies the additional information to be included in responses to meeting requests when the value of the AddAdditionalResponse parameter is $true. If the value contains spaces, enclose the value in quotation marks (").
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AddNewRequestsTentatively
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AddNewRequestsTentatively parameter specifies whether new meeting requests are added to the calendar as tentative. Valid values are:
- $true: New calendar items are added to the calendar as tentative. This value is the default.
- $false: Only existing calendar items are updated by the Calendar Attendant.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AddOrganizerToSubject
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AddOrganizerToSubject parameter specifies whether the meeting organizer's name is used as the subject of the meeting request. Valid values are:
- $true: The meeting organizer's name replaces any existing Subject value for the meeting request. This value is the default.
- $false: The original Subject value is preserved.
This parameter is used only on resource mailboxes where the AutomateProcessing parameter is set to AutoAccept.
Note: Default Calendar folder permissions use the AvailabilityOnly role, which doesn't allow viewing Subject fields in meeting requests. At a minimum, the LimitedDetails role is required to view Subject fields in meeting requests. Use the *-MailboxFolderPermission cmdlets to manage mailbox folder permissions.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AllBookInPolicy
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AllBookInPolicy parameter specifies whether to automatically approve in-policy requests from all users to the resource mailbox. Valid values are:
- $true: In-policy requests from all users are automatically approved. This value is the default.
- $false: In-policy requests from all users aren't automatically approved (approval by a delegate is required).
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AllowConflicts
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AllowConflicts parameter specifies whether to allow conflicting meeting requests. Valid values are:
$true: Conflicts are allowed. A recurring meeting series is accepted regardless of whether any occurrences conflict with existing bookings. The values of the ConflictPercentageAllowed or MaximumConflictInstances parameters are ignored.
$false: Conflicts aren't allowed. This value is the default. Whether an entire series is declined depends on the amount of conflicts in the series:
• The series is declined if the number or percentage of conflicts is higher than the ConflictPercentageAllowed or MaximumConflictInstances parameter values.
• The series is accepted, but conflicting occurrences are declined if the number or percentage of conflicts is lower than the ConflictPercentageAllowed or MaximumConflictInstances parameter values. If the EnableResponseDetails parameter value is $true, the organizer receives a notification email for each declined occurrence.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AllowRecurringMeetings
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AllowRecurringMeetings parameter specifies whether to allow recurring meetings in meeting requests. Valid values are:
- $true: Recurring meetings are allowed. This value is the default.
- $false: Recurring meetings aren't allowed.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AllRequestInPolicy
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AllRequestInPolicy parameter specifies whether to allow all users to submit in-policy requests to the resource mailbox. Valid values are:
- $true: All users are allowed to submit in-policy requests to the resource mailbox. These requests require approval by a resource mailbox delegate if the AllBookInPolicy parameter is set to $false (the default value of AllBookInPolicy is $true).
- $false: All users can't submit in-policy requests to the resource mailbox. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AllRequestOutOfPolicy
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AllRequestOutOfPolicy parameter specifies whether to allow all users to submit out-of-policy requests to the resource mailbox. Valid values are:
- $true: All users are allowed to submit out-of-policy requests to the resource mailbox. Out-of-policy requests require approval by a resource mailbox delegate.
- $false: All users can't submit out-of-policy requests to the resource mailbox. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AutomateProcessing
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AutomateProcessing parameter enables or disables calendar processing on the mailbox. Valid values are:
- None: Calendar processing is disabled on the mailbox. Both the resource booking attendant and the Calendar Attendant are disabled on the mailbox.
- AutoUpdate: Only the Calendar Attendant processes meeting requests and responses. Meeting requests are tentative in the calendar until approval by a delegate. Meeting organizers receive only decisions from delegates. Note: If you set this value on a room mailbox, delegates don't get requests.
- AutoAccept: Both the Calendar Attendant and resource booking attendant are enabled on the mailbox. The Calendar Attendant updates the calendar, and then the resource booking assistant accepts the meeting based upon the policies. If AllBookInPolicy or BookInPolicy are configured, eligible meeting organizers receive the decision directly without human intervention (free = accept; busy = decline). If AllRequestInPolicy or RequestInPolicy are configured and the ForwardRequestsToDelegates value is True, meeting requests are forwarded to delegates for approval. Other resource-specific settings (for example, DeleteSubject, AddOrganizerToSubject, DeleteComments, etc.) are also evaluated.
In on-premises Exchange, resource mailboxes created in the Exchange admin center (EAC) have the default value AutoAccept, while resource mailboxes created in PowerShell have the default value AutoUpdate.
In Exchange Online, resource mailbox created in the EAC and resource mailboxes created in PowerShell after November 15, 2018 have the default value AutoAccept. Resource mailboxes created in PowerShell before November 15 have the default value AutoUpdate.
The default value for user mailboxes is AutoUpdate, but you can't change the value on a user mailbox.
Parameter properties
| Type: | CalendarProcessingFlags |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-BookingType
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
The BookingType parameter specifies how reservations work on the resource mailbox. Valid values are:
- Standard: The resource can be reserved based on the other settings in this cmdlet. This value is the default
- Reserved: The resource can't be reserved.
Parameter properties
| Type: | <ResourceBookingType> |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-BookingWindowInDays
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The BookingWindowInDays parameter specifies the maximum number of days in advance that the resource can be reserved. A valid value is an integer from 0 through 1080. The default value is 180 days. The value 0 means today.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-BookInPolicy
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The BookInPolicy parameter specifies users or groups who are allowed to submit in-policy meeting requests to the resource mailbox that are automatically approved. You can use any value that uniquely identifies the user or group. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
Query-based groups (for example, dynamic distribution groups) aren't supported.
In delegate and principal scenarios, if the delegate or principal is specified by the BookInPolicy parameter, in-policy meeting requests to the resource mailbox are automatically approved.
To replace the existing list of users or groups with the values you specify, use the syntax UserOrGroup1,UserOrGroup2,...UserOrGroupN. If the values contain spaces or otherwise require quotation marks, use the syntax "UserOrGroup1","UserOrGroup2",..."UserOrGroupN".
To add users or groups without affecting the other entries, see Example 7.
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online, Exchange Online Protection
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ConflictPercentageAllowed
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ConflictPercentageAllowed parameter specifies the maximum percentage of meeting conflicts for new recurring meeting requests. A valid value is an integer from 0 through 100. The default value is 0.
If a new recurring meeting request conflicts with existing reservations for the resource more than the percentage specified by this parameter, the recurring meeting request is automatically declined. When the value is 0, no conflicts are permitted for new recurring meeting requests.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DeleteAttachments
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The DeleteAttachments parameter specifies whether to remove attachments from all incoming messages. Valid values are:
- $true: Remove any attachments in incoming messages. This value is the default.
- $false: Preserve any attachments in incoming messages.
This parameter is used only on resource mailboxes where the AutomateProcessing parameter is set to AutoAccept.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DeleteComments
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The DeleteComments parameter specifies whether to remove or keep any text in the message body of incoming meeting requests. Valid values are:
- $true: Remove any text in the message body of incoming meeting requests. This value is the default.
- $false: Preserve any text in the message body of incoming meeting requests.
This parameter is used only on resource mailboxes where the AutomateProcessing parameter is set to AutoAccept.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DeleteNonCalendarItems
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The DeleteNonCalendarItems parameter specifies whether to remove or keep all non-calendar-related messages that are received by the resource mailbox. Valid values are:
- $true: Non-calendar messages are deleted. This value is the default.
- $false: Non-calendar messages are preserved.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DeleteSubject
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The DeleteSubject parameter specifies whether to remove or keep the subject of incoming meeting requests. Valid values are:
- $true: Remove the Subject value of incoming meeting requests. This value is the default.
- $false: Preserve The Subject value of incoming meeting requests.
This parameter is used only on resource mailboxes where the AutomateProcessing parameter is set to AutoAccept.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnableAutoRelease
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
{{ Fill EnableAutoRelease Description }}
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnableResponseDetails
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The EnableResponseDetails parameter specifies whether to include the reasons for accepting or declining a meeting in the response email message. Valid values are:
- $true: The reasons for accepting or declining a meeting are included in the response message. This value is the default.
- $false: The reasons for accepting or declining a meeting aren't included in the response message.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnforceCapacity
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
The EnforceCapacity parameter specifies whether to restrict the number of attendees to the capacity of the workspace. For example, if capacity is set to 10, then only 10 people can book the workspace. Valid values are:
- $true: Capacity is enforced.
- $false: Capacity is not enforced. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EnforceSchedulingHorizon
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The EnforceSchedulingHorizon parameter controls the behavior of recurring meetings that extend beyond the date specified by the BookingWindowInDays parameter. Valid values are:
- $true: A recurring meeting request is automatically declined if the meetings start on or before the date specified by the BookingWindowInDays parameter, and the meetings extend beyond the specified date. This value is the default.
- $false: A recurring meeting request is automatically accepted if the meetings start on or before the date specified by the BookingWindowInDays parameter, and the meetings extend beyond the specified date. However, the number of meetings is automatically reduced so meetings don't occur after the specified date.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ForwardRequestsToDelegates
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ForwardRequestsToDelegates parameter specifies whether to forward incoming meeting requests to the delegates that are configured for the resource mailbox. Valid values are:
- $true: Forward incoming meeting requests to the delegates. This value is the default.
- $false: Don't forward incoming meeting requests to the delegates.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online, Exchange Online Protection
The Identity parameter specifies the resource mailbox that you want to modify. You can use any value that uniquely identifies the mailbox. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Domain\Username
- Email address
- GUID
- LegacyExchangeDN
- SamAccountName
- User ID or user principal name (UPN)
Parameter properties
| Type: | MailboxIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-IgnoreDefaultScope
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.
This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:
- You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
- You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaximumConflictInstances
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The MaximumConflictInstances parameter specifies the maximum number of conflicts for new recurring meeting requests when the AllowRecurringMeetings parameter is set to $true. A valid value is an integer from 0 through INT32 (2147483647). The default value is 0.
If a new recurring meeting request conflicts with existing reservations for the resource more than the number of times specified by the MaximumConflictInstances parameter value, the recurring meeting request is automatically declined. When the value is 0, no conflicts are permitted for new recurring meeting requests.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MaximumDurationInMinutes
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The MaximumDurationInMinutes parameter specifies the maximum duration in minutes for meeting requests. A valid value is an integer from 0 through INT32 (2147483647). The default value is 1440 (24 hours).
When the value is set to 0, the maximum duration of a meeting is unlimited. For recurring meetings, the value of this parameter applies to the length of an individual meeting instance.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MinimumDurationInMinutes
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
The MinimumDurationInMinutes parameter specifies the minimum duration in minutes for meeting requests in workspace mailboxes. A valid value is an integer from 0 through INT32 (2147483647). The default value is 0, which means there is no minimum duration.
For recurring meetings, the value of this parameter applies to the length of an individual meeting instance.
This parameter only works on workspace mailboxes.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-OrganizerInfo
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The OrganizerInfo parameter specifies whether the resource mailbox sends organizer information when a meeting request is declined because of conflicts. Valid values are:
- $true: Organizer information is sent when a meeting request is declined because of conflicts. This value is the default.
- $false: Organizer information isn't sent when a meeting request is declined because of conflicts.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PostReservationMaxClaimTimeInMinutes
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
{{ Fill PostReservationMaxClaimTimeInMinutes Description }}
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ProcessExternalMeetingMessages
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ProcessExternalMeetingMessages parameter specifies whether to process meeting requests that originate outside the Exchange organization. Valid values are:
- $true: Meeting requests from external senders are processed.
- $false: Meeting requests from external senders are rejected. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemoveCanceledMeetings
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
The RemoveCanceledMeetings parameter specifies whether to automatically delete meetings that were cancelled by the organizer from the resource mailbox's calendar. Valid values are:
- $true: Canceled meetings are deleted.
- $false: Canceled meetings aren't deleted. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemoveForwardedMeetingNotifications
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The RemoveForwardedMeetingNotifications parameter specifies whether forwarded meeting notifications are moved to the Deleted Items folder after they're processed by the Calendar Attendant. Valid values are:
- $true: Processed forwarded meeting notifications are deleted (moved to the Deleted Items folder).
- $false: Processed forwarded meeting notifications aren't deleted. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemoveOldMeetingMessages
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The RemoveOldMeetingMessages parameter specifies whether the Calendar Attendant removes old and redundant updates and responses. Valid values are:
- $true: Outdated and redundant meeting messages are deleted. This value is the default.
- $false: Outdated and redundant meeting messages aren't deleted.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RemovePrivateProperty
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The RemovePrivateProperty parameter specifies whether to clear the private flag for incoming meetings that were sent by the organizer in the original requests. Valid values are:
- $true: The private flag for incoming meeting requests is cleared (the meeting is no longer private). This value is the default.
- $false: The private flag for incoming meeting requests is preserved (private meetings stay private).
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RequestInPolicy
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The RequestInPolicy parameter specifies users who are allowed to submit in-policy meeting requests to the resource mailbox that require approval by a resource mailbox delegate. You can use any value that uniquely identifies the user. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RequestOutOfPolicy
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The RequestOutOfPolicy parameter specifies users who are allowed to submit out-of-policy requests that require approval by a resource mailbox delegate. You can use any value that uniquely identifies the user. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ResourceDelegates
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ResourceDelegates parameter specifies users can approve or reject requests that are sent to the resource mailbox. You can use any value that uniquely identifies the user. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".
Parameter properties
| Type: | RecipientIdParameter[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ScheduleOnlyDuringWorkHours
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ScheduleOnlyDuringWorkHours parameter specifies whether to allow meetings to be scheduled outside of the working hours that are defined for the resource mailbox. Valid values are:
- $true: Meeting requests that are outside of working hours are automatically rejected.
- $false: Meeting requests that are outside of working hours aren't automatically rejected. This value is the default.
You configure the working hours of the resource mailbox by using the WorkDays, WorkingHoursStartTime, WorkingHoursEndTime and WorkingHoursTimeZone parameters on the Set-MailboxCalendarConfiguration cmdlet.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TentativePendingApproval
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The TentativePendingApproval parameter specifies whether to mark pending requests as tentative on the calendar. Valid values are:
- $true: Meeting requests that are awaiting approval from a delegate appear in the calendar as tentative. This value is the default.
- $false: Meeting requests that are awaiting approval appear in the calendar as free.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online, Exchange Online Protection
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.