Remove-RecipientPermission
This cmdlet is available only in the cloud-based service.
Use the Remove-RecipientPermission cmdlet to remove SendAs permission from users in a cloud-based organization.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
Remove-RecipientPermission
[-Identity] <RecipientIdParameter>
-AccessRights <MultiValuedProperty>
-Trustee <SecurityPrincipalIdParameter>
[-Confirm]
[-Deny]
[-MultiTrustees <MultiValuedProperty>]
[-SkipDomainValidationForMailContact]
[-SkipDomainValidationForMailUser]
[-SkipDomainValidationForSharedMailbox]
[-WhatIf]
[<CommonParameters>]
Description
When a user is given SendAs permission to another user or group, the user can send messages that appear to come from the other user or group.
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Remove-RecipientPermission "Help Desk" -AccessRights SendAs -Trustee "Ayla Kol"
This example removes the SendAs permission from the user Ayla Kol for the mailbox Help Desk. Ayla can't send messages that appear to come directly from the Help Desk mailbox.
Parameters
-AccessRights
Applicable: Exchange Online
The AccessRights parameter specifies the permission that you want to remove from the trustee on the target recipient. The only valid value for this parameter is SendAs.
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Online
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Deny
Applicable: Exchange Online
{{ Fill Deny Description }}
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Identity
Applicable: Exchange Online
The Identity parameter specifies the target recipient. The user or group specified by the Trustee parameter can no longer operate on this recipient.
You can specify any type of recipient, for example:
- Mailboxes
- Mail users
- External contacts
- Distribution groups
- Dynamic distribution groups
You can use any value that uniquely identifies the recipient. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Email address
- GUID
Parameter properties
| Type: | RecipientIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-MultiTrustees
Applicable: Exchange Online
{{ Fill MultiTrustees Description }}
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SkipDomainValidationForMailContact
Applicable: Exchange Online
The SkipDomainValidationForMailContact switch skips the check that confirms the proxy addresses of the external contact specified by the Identity parameter are in an accepted domain of the organization. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-SkipDomainValidationForMailUser
Applicable: Exchange Online
The SkipDomainValidationForMailUser switch skips the check that confirms the proxy addresses of the mail user specified by the Identity parameter are in an accepted domain of the organization. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-SkipDomainValidationForSharedMailbox
Applicable: Exchange Online
The SkipDomainValidationForSharedMailbox switch skips the check that confirms the proxy addresses of the shared mailbox specified by the Identity parameter are in an accepted domain of the organization. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Trustee
Applicable: Exchange Online
The Trustee parameter specifies whose Send As permissions are being removing from the specified target recipient. You can specify the following types of users or groups (security principals) for this parameter:
- Mailbox users
- Mail users with a Microsoft account
- Security groups
You can use any value that uniquely identifies the user or group. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Domain\Username
- Email address
- GUID
- LegacyExchangeDN
- SamAccountName
- User ID or user principal name (UPN)
Parameter properties
| Type: | SecurityPrincipalIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Online
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.