New-X400AuthoritativeDomain
This cmdlet is available only in on-premises Exchange.
Use the New-X400AuthoritativeDomain cmdlet to create and specify the X.400 authoritative domain for the organization. The X.400 authoritative domain defines the standard fields for the namespace appended to the recipient identity for all mailboxes assigned an X.400 address.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
New-X400AuthoritativeDomain
[-Name] <String>
-X400DomainName <X400Domain>
[-Confirm]
[-DomainController <Fqdn>]
[-WhatIf]
[-X400ExternalRelay <Boolean>]
[<CommonParameters>]
Description
X.400 domain names can only include the following ASCII characters:
- A to Z
- a to z
- 0-9
- These punctuation and special characters: (space) ' () + , - . / : = ?
You can use the following X.400 attributes (one each per address):
country
- Abbreviation: C
- Maximum character length: 2
administrative domain
- Abbreviation: A
- Maximum character length: 16
private domain
- Abbreviation: P
- Maximum character length: 16
organization name
- Abbreviation: O
- Maximum character length: 64
organizational unit name
- Abbreviation: OU1 to OU4
- Maximum character length: 32
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
New-X400AuthoritativeDomain -Name Sales -X400DomainName "C=US;A=Fabrikam;P=Contoso;O=Sales"
This example creates the X.400 authoritative domain Sales in the private domain Contoso, which is under the administrative domain Fabrikam.
Example 2
New-X400AuthoritativeDomain -Name "Sales Europe" -X400DomainName "C=US;A=Fabrikam;P=Contoso;O=Sales;OU1=Europe" -X400ExternalRelay: $true
This example creates an external relay domain for the X.400 namespace Europe organizational unit (OU) under the Sales organization in the private domain Contoso, which is under the administrative domain Fabrikam.
Parameters
-Confirm
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Name
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The Name parameter specifies the unique name for the X.400 authoritative domain. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-X400DomainName
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The X400DomainName parameter specifies the X.400 namespace, which can only include the X.400 organizational components. Specifically, only the following attribute types are supported:
- C (Country)
- A (ADMD)
- P (PRMD)
- O (Organization)
- OU1 (Organization unit 1)
- OU2 (Organization unit 2)
- OU3 (Organization unit 3)
- OU4 (Organization unit 4)
Separate the address attributes with semicolons and enclose the entire address in quotation marks (for example, "C=US;A=att;P=Contoso;O=Sales").
Parameter properties
| Type: | X400Domain |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-X400ExternalRelay
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
The X400ExternalRelay parameter specifies authoritative domain an external relay domain. If you set the X400ExternalRelay parameter to $true, Microsoft Exchange routes email to the external address and doesn't treat resolution failures to this subdomain as an error.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.