New-PartnerApplication
This cmdlet is functional only in on-premises Exchange.
Use the New-PartnerApplication cmdlet to create partner application configurations in on-premises Exchange organizations.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
ACSTrustApplication
New-PartnerApplication
[-Name] <String>
-ApplicationIdentifier <String>
[-Realm <String>]
[-AcceptSecurityIdentifierInformation <Boolean>]
[-AccountType <SupportedAccountType>]
[-ActAsPermissions <String[]>]
[-AppOnlyPermissions <String[]>]
[-Confirm]
[-DomainController <Fqdn>]
[-Enabled <Boolean>]
[-IssuerIdentifier <String>]
[-LinkedAccount <UserIdParameter>]
[-WhatIf]
[<CommonParameters>]
AuthMetadataUrl
New-PartnerApplication
[-Name] <String>
-AuthMetadataUrl <String>
[-TrustAnySSLCertificate]
[-AcceptSecurityIdentifierInformation <Boolean>]
[-AccountType <SupportedAccountType>]
[-ActAsPermissions <String[]>]
[-AppOnlyPermissions <String[]>]
[-Confirm]
[-DomainController <Fqdn>]
[-Enabled <Boolean>]
[-IssuerIdentifier <String>]
[-LinkedAccount <UserIdParameter>]
[-WhatIf]
[<CommonParameters>]
Description
You can configure partner applications such as Microsoft SharePoint to access Exchange resources. Use the New-PartnerApplication cmdlet to create a partner application configuration for an application that needs to access Exchange resources. For details, see Plan Exchange 2016 integration with SharePoint and Skype for Business.
We recommend that you use the Configure-EnterprisePartnerApplication.ps1 script in the %ExchangeInstallPath%Scripts folder to configure partner applications.
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
New-PartnerApplication -Name HRApp -ApplicationIdentifier 00000006-0000-0dd1-ac00-000000000000
This example creates a new HRApp partner application named HRApp.
Parameters
-AcceptSecurityIdentifierInformation
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AcceptSecurityIdentifierInformation parameter specifies whether Exchange should accept security identifiers (SIDs) from another trusted Active Directory forest for the partner application. By default, new partner applications are configured to not accept SIDs from another forest. If you're in deployment with a trusted forest, set the parameter to $true.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AccountType
Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AccountType parameter specifies the type of Microsoft account that's required for the partner application. Valid values are:
- OrganizationalAccount (default value)
- ConsumerAccount
Parameter properties
| Type: | SupportedAccountType |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ActAsPermissions
Applicable: Exchange Server 2013
This parameter is available only in Exchange Server 2013.
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ApplicationIdentifier
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ApplicationIdentifier parameter specifies a unique application identifier for the partner application that uses an authorization server. When specifying a value for the ApplicationIdentifier parameter, you must also use the UseAuthServer parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ACSTrustApplication
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AppOnlyPermissions
Applicable: Exchange Server 2013
This parameter is available only in Exchange Server 2013.
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | String[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AuthMetadataUrl
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The AuthMetadataUrl parameter specifies the URL that Exchange can retrieve the AuthMetadata document from for a partner application that doesn't use an authorization server. When specifying the AuthMetadataUrl parameter for a partner application, you can't specify the ApplicationIdentifier and UseAuthServer parameters.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
AuthMetadataUrl
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Enabled
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Enabled parameter specifies whether the partner application is enabled. By default, new partner applications are enabled. Set the parameter to $false to create the application configuration in a disabled state.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-IssuerIdentifier
Applicable: Exchange Server 2013
This parameter is available only in Exchange Server 2013.
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LinkedAccount
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The LinkedAccount parameter specifies a linked Active Directory user account for the application. Exchange evaluates Role Based Access Control (RBAC) permissions for the linked account when authorizing a token used to perform a task.
Parameter properties
| Type: | UserIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Name
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Name parameter specifies a name for the partner application.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Realm
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The Realm parameter specifies a security realm for the partner application. If the token is from a domain that's not an accepted domain, Exchange checks the realm specified in the token. In such a scenario, only tokens with the same realm specified in the partner application can access Exchange resources.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ACSTrustApplication
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TrustAnySSLCertificate
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The TrustAnySSLCertificate switch allows Exchange to accept certificates from untrusted certification authorities (CAs). You don't need to specify a value with this switch.
We don't recommend using this switch in a production environment.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
AuthMetadataUrl
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.