New-DlpComplianceRule

Syntax

Default (Default)

New-DlpComplianceRule
    [-Name] <String>
    -Policy <PolicyIdParameter>
    [-AccessScope <Microsoft.Office.CompliancePolicy.Tasks.AccessScope>]
    [-ActivationDate <System.DateTime>]
    [-AddRecipients <PswsHashtable>]
    [-AdvancedRule <String>]
    [-AlertProperties <PswsHashtable>]
    [-AnyOfRecipientAddressContainsWords <MultiValuedProperty>]
    [-AnyOfRecipientAddressMatchesPatterns <MultiValuedProperty>]
    [-ApplyBrandingTemplate <String>]
    [-ApplyHtmlDisclaimer <PswsHashtable>]
    [-AttachmentIsNotLabeled <Boolean>]
    [-BlockAccess <Boolean>]
    [-BlockAccessScope <Microsoft.Office.CompliancePolicy.Tasks.BlockAccessScope>]
    [-Comment <String>]
    [-Confirm]
    [-ContentCharacterSetContainsWords <MultiValuedProperty>]
    [-ContentContainsSensitiveInformation <PswsHashtable[]>]
    [-ContentExtensionMatchesWords <MultiValuedProperty>]
    [-ContentFileTypeMatches <MultiValuedProperty>]
    [-ContentIsNotLabeled <Boolean>]
    [-ContentIsShared <Boolean>]
    [-ContentPropertyContainsWords <MultiValuedProperty>]
    [-Disabled <Boolean>]
    [-DocumentContainsWords <MultiValuedProperty>]
    [-DocumentCreatedBy <MultiValuedProperty>]
    [-DocumentCreatedByMemberOf <RecipientIdParameter[]>]
    [-DocumentIsPasswordProtected <Boolean>]
    [-DocumentIsUnsupported <Boolean>]
    [-DocumentMatchesPatterns <MultiValuedProperty>]
    [-DocumentNameMatchesPatterns <MultiValuedProperty>]
    [-DocumentNameMatchesWords <MultiValuedProperty>]
    [-DocumentSizeOver <Microsoft.Exchange.Data.ByteQuantifiedSize>]
    [-DomainCountOver <UInt32>]
    [-EncryptRMSTemplate <RmsTemplateIdParameter>]
    [-EndpointDlpBrowserRestrictions <PswsHashtable[]>]
    [-EndpointDlpRestrictions <PswsHashtable[]>]
    [-EnforcePortalAccess <Boolean>]
    [-EvaluateRulePerComponent <Boolean>]
    [-ExceptIfAccessScope <Microsoft.Office.CompliancePolicy.Tasks.AccessScope>]
    [-ExceptIfAnyOfRecipientAddressContainsWords <MultiValuedProperty>]
    [-ExceptIfAnyOfRecipientAddressMatchesPatterns <MultiValuedProperty>]
    [-ExceptIfContentCharacterSetContainsWords <MultiValuedProperty>]
    [-ExceptIfContentContainsSensitiveInformation <PswsHashtable[]>]
    [-ExceptIfContentExtensionMatchesWords <MultiValuedProperty>]
    [-ExceptIfContentFileTypeMatches <MultiValuedProperty>]
    [-ExceptIfContentIsShared <Boolean>]
    [-ExceptIfContentPropertyContainsWords <MultiValuedProperty>]
    [-ExceptIfDocumentContainsWords <MultiValuedProperty>]
    [-ExceptIfDocumentCreatedBy <MultiValuedProperty>]
    [-ExceptIfDocumentCreatedByMemberOf <RecipientIdParameter[]>]
    [-ExceptIfDocumentIsPasswordProtected <Boolean>]
    [-ExceptIfDocumentIsUnsupported <Boolean>]
    [-ExceptIfDocumentMatchesPatterns <MultiValuedProperty>]
    [-ExceptIfDocumentNameMatchesPatterns <MultiValuedProperty>]
    [-ExceptIfDocumentNameMatchesWords <MultiValuedProperty>]
    [-ExceptIfDocumentSizeOver <Microsoft.Exchange.Data.ByteQuantifiedSize>]
    [-ExceptIfFrom <RecipientIdParameter[]>]
    [-ExceptIfFromAddressContainsWords <MultiValuedProperty>]
    [-ExceptIfFromAddressMatchesPatterns <MultiValuedProperty>]
    [-ExceptIfFromMemberOf <SmtpAddress[]>]
    [-ExceptIfFromScope <Microsoft.Office.CompliancePolicy.PolicyEvaluation.FromScope>]
    [-ExceptIfHasSenderOverride <Boolean>]
    [-ExceptIfHeaderContainsWords <PswsHashtable>]
    [-ExceptIfHeaderMatchesPatterns <PswsHashtable>]
    [-ExceptIfMessageSizeOver <Microsoft.Exchange.Data.ByteQuantifiedSize>]
    [-ExceptIfMessageTypeMatches <Microsoft.Office.CompliancePolicy.PolicyEvaluation.MessageTypes>]
    [-ExceptIfProcessingLimitExceeded <Boolean>]
    [-ExceptIfRecipientADAttributeContainsWords <PswsHashtable>]
    [-ExceptIfRecipientADAttributeMatchesPatterns <PswsHashtable>]
    [-ExceptIfRecipientDomainIs <MultiValuedProperty>]
    [-ExceptIfSenderADAttributeContainsWords <PswsHashtable>]
    [-ExceptIfSenderADAttributeMatchesPatterns <PswsHashtable>]
    [-ExceptIfSenderDomainIs <MultiValuedProperty>]
    [-ExceptIfSenderIPRanges <MultiValuedProperty>]
    [-ExceptIfSentTo <MultiValuedProperty>]
    [-ExceptIfSentToMemberOf <RecipientIdParameter[]>]
    [-ExceptIfSubjectContainsWords <MultiValuedProperty>]
    [-ExceptIfSubjectMatchesPatterns <MultiValuedProperty>]
    [-ExceptIfSubjectOrBodyContainsWords <MultiValuedProperty>]
    [-ExceptIfSubjectOrBodyMatchesPatterns <MultiValuedProperty>]
    [-ExceptIfUnscannableDocumentExtensionIs <MultiValuedProperty>]
    [-ExceptIfWithImportance <Microsoft.Office.CompliancePolicy.Tasks.WithImportance>]
    [-ExpiryDate <System.DateTime>]
    [-From <RecipientIdParameter[]>]
    [-FromAddressContainsWords <MultiValuedProperty>]
    [-FromAddressMatchesPatterns <MultiValuedProperty>]
    [-FromMemberOf <SmtpAddress[]>]
    [-FromScope <Microsoft.Office.CompliancePolicy.PolicyEvaluation.FromScope>]
    [-GenerateAlert <MultiValuedProperty>]
    [-GenerateIncidentReport <MultiValuedProperty>]
    [-HasSenderOverride <Boolean>]
    [-HeaderContainsWords <PswsHashtable>]
    [-HeaderMatchesPatterns <PswsHashtable>]
    [-ImmutableId <System.Guid>]
    [-IncidentReportContent <ReportContentOption[]>]
    [-MessageIsNotLabeled <Boolean>]
    [-MessageSizeOver <Microsoft.Exchange.Data.ByteQuantifiedSize>]
    [-MessageTypeMatches <Microsoft.Office.CompliancePolicy.PolicyEvaluation.MessageTypes>]
    [-MipRestrictAccess <PswsHashtable[]>]
    [-Moderate <PswsHashtable>]
    [-ModifySubject <PswsHashtable>]
    [-NonBifurcatingAccessScope <Microsoft.Office.CompliancePolicy.Tasks.NonBifurcatingAccessScope>]
    [-NotifyAllowOverride <OverrideOption[]>]
    [-NotifyEmailCustomSenderDisplayName <String>]
    [-NotifyEmailCustomSubject <String>]
    [-NotifyEmailCustomText <String>]
    [-NotifyEmailExchangeIncludeAttachment <Boolean>]
    [-NotifyEmailOnedriveRemediationActions <NotifyEmailRemediationActions>]
    [-NotifyEndpointUser <PswsHashtable>]
    [-NotifyOverrideRequirements <Microsoft.Office.CompliancePolicy.PolicyEvaluation.PolicyOverrideRequirements>]
    [-NotifyPolicyTipCustomDialog <String>]
    [-NotifyPolicyTipCustomText <String>]
    [-NotifyPolicyTipCustomTextTranslations <MultiValuedProperty>]
    [-NotifyPolicyTipDisplayOption <Microsoft.Office.CompliancePolicy.PolicyEvaluation.PolicyTipDisplayOption>]
    [-NotifyPolicyTipUrl <String>]
    [-NotifyUser <MultiValuedProperty>]
    [-NotifyUserType <Microsoft.Office.CompliancePolicy.PolicyEvaluation.NotifyUserType>]
    [-OnPremisesScannerDlpRestrictions <PswsHashtable[]>]
    [-PrependSubject <String>]
    [-Priority <System.Int32>]
    [-ProcessingLimitExceeded <Boolean>]
    [-Quarantine <Boolean>]
    [-RecipientADAttributeContainsWords <PswsHashtable>]
    [-RecipientADAttributeMatchesPatterns <PswsHashtable>]
    [-RecipientCountOver <UInt32>]
    [-RecipientDomainIs <MultiValuedProperty>]
    [-RedirectMessageTo <RecipientIdParameter[]>]
    [-RemoveHeader <MultiValuedProperty>]
    [-RemoveRMSTemplate <Boolean>]
    [-ReportSeverityLevel <RuleSeverity>]
    [-RestrictAccess <System.Collections.Hashtable[]>]
    [-RestrictBrowserAccess <Boolean>]
    [-RuleErrorAction <Microsoft.Office.CompliancePolicy.PolicyEvaluation.PolicyRuleErrorAction>]
    [-SenderADAttributeContainsWords <PswsHashtable>]
    [-SenderADAttributeMatchesPatterns <PswsHashtable>]
    [-SenderAddressLocation <Microsoft.Office.CompliancePolicy.PolicyEvaluation.PolicySenderAddressLocation>]
    [-SenderDomainIs <MultiValuedProperty>]
    [-SenderIPRanges <MultiValuedProperty>]
    [-SentTo <MultiValuedProperty>]
    [-SentToMemberOf <RecipientIdParameter[]>]
    [-SetHeader <PswsHashtable>]
    [-SharedByIRMUserRisk <MultiValuedProperty>]
    [-StopPolicyProcessing <Boolean>]
    [-SubjectContainsWords <MultiValuedProperty>]
    [-SubjectMatchesPatterns <MultiValuedProperty>]
    [-SubjectOrBodyContainsWords <MultiValuedProperty>]
    [-SubjectOrBodyMatchesPatterns <MultiValuedProperty>]
    [-ThirdPartyAppDlpRestrictions <PswsHashtable[]>]
    [-TriggerPowerAutomateFlow <String>]
    [-UnscannableDocumentExtensionIs <MultiValuedProperty>]
    [-ValidateRule]
    [-WhatIf]
    [-WithImportance <Microsoft.Office.CompliancePolicy.Tasks.WithImportance>]
    [<CommonParameters>]

Description

Examples

Example 1

New-DlpComplianceRule -Name "SocialSecurityRule" -Policy "USFinancialChecks" -ContentContainsSensitiveInformation @{Name="U.S. Social Security Number (SSN)"} -BlockAccess $True

Example 2

$contains_complex_types = @{
    operator = "And"
    groups = @(
        @{
            operator = "Or"
            name = "PII Identifiers"
            sensitivetypes = @(
                @{
                    name = "Drug Enforcement Agency (DEA) Number"
                    maxconfidence = 100
                    minconfidence = 75
                    mincount = 1
                    maxcount = -1
                }
            )
        }
        @{
            operator = "Or"
            name = "Medical Terms"
            sensitivetypes = @(
                @{
                    name = "International Classification of Diseases (ICD-9-CM)"
                    maxconfidence = 100
                    minconfidence = 75
                    mincount = 1
                    maxcount = -1
                }
                @{
                    name = "International Classification of Diseases (ICD-10-CM)"
                    maxconfidence = 100
                    minconfidence = 75
                    mincount = 1
                    maxcount = -1
                }
                )
        }

    )
}

New-DLPComplianceRule -Name "Contoso Medical Information" -Policy "Contoso Medical Checks" -ContentContainsSensitiveInformation $contains_complex_types

Example 3

Contents of the file named C:\Data\Sensitive Type.txt:

{
"Version": "1.0",
"Condition": {
  "Operator": "And",
  "SubConditions": [
    {
      "ConditionName": "ContentContainsSensitiveInformation",
      "Value": [
        {
          "groups": [
            {
              "Operator": "Or",
              "labels": [
                {
                  "name": "defa4170-0d19-0005-000a-bc88714345d2",
                  "type": "Sensitivity"
                }
              ],
                "name": "Default",
                "sensitivetypes": [
                  {
                   "confidencelevel": "Low",
                   "name": "Credit Card Number"
                  }
                ]
            }
          ]
        }
      ]
    },
    {
      "Operator": "Not",
      "SubConditions": [
        {
          "Operator": "OR",
          "SubConditions": [
            {
              "ConditionName": "FromMemberOf",
              "Value": [
              "janesteam@contoso.com"
              ]
            },
            {
              "ConditionName": "SentTo",
              "Value": [
              "adele@contoso.com"
              ]
            }
          ],
        }
      ]
    }
  ]
 }
}

$data = Get-Content -Path "C:\Data\Sensitive Type.txt" -ReadCount 0 -encoding Byte

$string = [System.Text.Encoding]::UTF8.GetString($data)

New-DLPComplianceRule -Name "Contoso Rule 1" -Policy "Contoso Policy 1" -AdvancedRule $string -NotifyUser

Example 4

$myEntraAppId = ""

$myEntraAppName = ""

$locations = "[{`"Workload`":`"Applications`",`"Location`":`"$myEntraAppId`",`"LocationDisplayName`":`"$myEntraAppName`",`"LocationSource`":`"Entra`",`"LocationType`":`"Individual`",`"Inclusions`":[{`"Type`":`"Tenant`",`"Identity`":`"All`"}]}]"

New-DlpCompliancePolicy -Name "Test Entra DLP" -Mode Enable -Locations $locations -EnforcementPlanes @("Entra")

New-DlpComplianceRule -Name "Test Entra Rule" -Policy "Test Entra DLP" -ContentContainsSensitiveInformation @{Name = "credit card number"}  -GenerateAlert $true -GenerateIncidentReport @("siteadmin") -NotifyUser @("admin@contonso.onmicrosoft.com") -RestrictAccess @(@{setting="UploadText";value="Block"})

Parameters

-AccessScope

Applicable: Security & Compliance

The AccessScope parameter specifies a condition for the DLP rule that's based on the access scope of the content. The rule is applied to content that matches the specified access scope. Valid values are:

• InOrganization: The rule is applied to content that's accessible or delivered to a recipient inside the organization.
• NotInOrganization: The rule is applied to content that's accessible or delivered to a recipient outside the organization.
• None: The condition isn't used.

Parameter properties

Parameter sets

-ActivationDate

Applicable: Security & Compliance

This parameter is reserved for internal Microsoft use.

Parameter properties

Parameter sets

-AddRecipients

Applicable: Security & Compliance

The AddRecipients parameter specifies an action for the DLP rule that adds the specified recipients to email messages. This parameter uses the following syntax:

• @{<AddToRecipients | CopyTo | BlindCopyTo> = "emailaddress"}. For example, @{AddToRecipients = "laura@contoso.com"} or @{BlindCopyTo = "julia@contoso.com"}.
• @{AddManagerAsRecipientType = "<To | Cc | Bcc>"}. For example, @{AddManagerAsRecipientType = "Bcc"}.

You can use this action in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-AdvancedRule

Applicable: Security & Compliance

The AdvancedRule parameter uses complex rule syntax that supports multiple AND, OR, and NOT operators and nested groups.

This parameter uses JSON syntax that's similar to the traditional advanced syntax in Example 2, but read from a file that contains additional operators and combinations that aren't traditionally supported.

For syntax details, see Example 3.

Parameter properties

Parameter sets

-AlertProperties

Applicable: Security & Compliance

{{ Fill AlertProperties Description }}

Parameter properties

Parameter sets

-AnyOfRecipientAddressContainsWords

Applicable: Security & Compliance

The AnyOfRecipientAddressContainsWords parameter specifies a condition for the DLP rule that looks for words or phrases in recipient email addresses. You can specify multiple words or phrases separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 600.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-AnyOfRecipientAddressMatchesPatterns

Applicable: Security & Compliance

The AnyOfRecipientAddressMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in recipient email addresses by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ApplyBrandingTemplate

Applicable: Security & Compliance

The ApplyBrandingTemplate parameter specifies an action for the DLP rule that applies a custom branding template for messages encrypted by Microsoft Purview Message Encryption. You identify the custom branding template by name. If the name contains spaces, enclose the name in quotation marks (").

Use the EnforcePortalAccess parameter to control whether external users are required to use the encrypted message portal to view encrypted messages.

Parameter properties

Parameter sets

-ApplyHtmlDisclaimer

Applicable: Security & Compliance

The ApplyHtmlDisclaimer parameter specifies an action for the rule that adds disclaimer text to messages.This parameter uses the syntax: @{Text = "Disclaimer text"; Location = <Append | Prepend>; FallbackAction = <Wrap | Ignore | Reject> }.

• Text: Specifies the disclaimer text to add. Disclaimer text can include HTML tags and inline cascading style sheet (CSS) tags. You can add images using the IMG tag.
• Location: Specifies where to insert the HTML disclaimer text in the body of messages. Append = Add to the end of the message body. Prepend = Insert at the beginning of the message body.
• FallbackAction: Specifies what to do if the HTML disclaimer can't be added to a message. Wrap = The original message is wrapped in a new message envelope, and the disclaimer is used as the message body for the new message. Ignore = The rule is ignored and the message is delivered without the disclaimer. Reject = The message is rejected.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-AttachmentIsNotLabeled

Applicable: Security & Compliance

{{ Fill AttachmentIsNotLabeled Description }}

Parameter properties

Parameter sets

-BlockAccess

Applicable: Security & Compliance

The BlockAccess parameter specifies an action for the DLP rule that blocks access to the source item when the conditions of the rule are met. Valid values are:

• $true: Blocks further access to the source item that matched the rule. The owner, author, and site owner can still access the item.
• $false: Allows access to the source item that matched the rule. This value is the default.

Parameter properties

Parameter sets

-BlockAccessScope

Applicable: Security & Compliance

The BlockAccessScope parameter specifies the scope of the block access action. Valid values are:

• All: Blocks access to everyone except the owner and the last modifier.
• PerUser: Blocks access to external users.
• PerAnonymousUser: Blocks access to people through the "Anyone with the link" option in SharePoint and OneDrive.

Parameter properties

Parameter sets

-Comment

Applicable: Security & Compliance

The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".

Parameter properties

Parameter sets

-Confirm

Applicable: Security & Compliance

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

• Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
• Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Parameter properties

Parameter sets

-ContentCharacterSetContainsWords

Applicable: Security & Compliance

The ContentCharacterSetContainsWords parameter specifies a condition for the rule that looks for character set names in messages. You can specify multiple values separated by commas.

Supported character sets are big5, din_66003, euc-jp, euc-kr, gb18030, gb2312, hz-gb-2312, iso-2022-jp, iso-2022-kr, iso-8859-1, iso-8859-13, iso-8859-15, iso-8859-2, iso-8859-3, iso-8859-4, iso-8859-5, iso-8859-6, iso-8859-7, iso-8859-8, iso-8859-9, koi8-r, koi8-u, ks_c_5601-1987, ns_4551-1, sen_850200_b, shift_jis, utf-7, utf-8, windows-1250, windows-1251, windows-1252, windows-1253, windows-1254, windows-1255, windows-1256, windows-1257, windows-1258, windows-874.

Parameter properties

Parameter sets

-ContentContainsSensitiveInformation

Applicable: Security & Compliance

The ContentContainsSensitiveInformation parameter specifies a condition for the rule that's based on a sensitive information type match in content. The rule is applied to content that contains the specified sensitive information type. In addition to sensitive information type, the parameter can also be applied to files that contain sensitivity labels.

This parameter uses the basic syntax @(@{Name="SensitiveInformationType1";[minCount="Value"],@{Name="SensitiveInformationType2";[minCount="Value"],...). For example, @(@{Name="U.S. Social Security Number (SSN)"; minCount="2"},@{Name="Credit Card Number"}). Example for sensitivity label: @(@{operator = "And"; groups = @(@{operator="Or";name="Default";labels=@(@{name="Confidential";type="Sensitivity"})})}).

Use the Get-DLPSensitiveInformationType cmdlet to list the sensitive information types for your organization. For more information on sensitive information types, see What the sensitive information types in Exchange look for.

For an example of advanced syntax, see Example 2 in this topic.

Parameter properties

Parameter sets

-ContentExtensionMatchesWords

Applicable: Security & Compliance

The ContentExtensionMatchesWords parameter specifies a condition for the DLP rule that looks for words in file extensions. You can specify multiple words separated by commas. Irrespective of the original file type, this predicate matches based on the extension that is present in the name of the file.

Parameter properties

Parameter sets

-ContentFileTypeMatches

Applicable: Security & Compliance

{{ Fill ContentFileTypeMatches Description }}

Parameter properties

Parameter sets

-ContentIsNotLabeled

Applicable: Security & Compliance

The ContentIsNotLabeled parameter specifies a condition for the DLP rule that looks for attachments or documents that aren't labeled. Valid values are:

• $true: Look for attachments or documents that aren't labeled.
• $false: Don't look for unlabeled attachments or documents.

In Exchange, this condition is matched only if both the attachment and the message body aren't labeled.

Parameter properties

Parameter sets

-ContentIsShared

Applicable: Security & Compliance

The ContentIsNotLabeled parameter specifies a condition for the DLP rule that looks for attachments or documents that aren't labeled. Valid values are:

• $true: Look for attachments or documents that aren't labeled.
• $false: Don't look for unlabeled attachments or documents.

In Exchange, this condition is matched only if both the attachment and the message body aren't labeled.

Parameter properties

Parameter sets

-ContentPropertyContainsWords

Applicable: Security & Compliance

The ContentPropertyContainsWords parameter specifies a condition for the DLP rule that's based on a property match in content. The rule is applied to content that contains the specified property.

This parameter accepts values in the format: "Property1:Value1,Value2","Property2:Value3,Value4",..."PropertyN:ValueN,ValueN".

Parameter properties

Parameter sets

-Disabled

Applicable: Security & Compliance

The Disabled parameter specifies whether the DLP rule is disabled. Valid values are:

• $true: The rule is disabled.
• $false: The rule is enabled. This value is the default.

Parameter properties

Parameter sets

-DocumentContainsWords

Applicable: Security & Compliance

The DocumentContainsWords parameter specifies a condition for the DLP rule that looks for words in message attachments. Only supported attachment types are checked.

To specify multiple words or phrases, this parameter uses the syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-DocumentCreatedBy

Applicable: Security & Compliance

The DocumentCreatedBy parameter specifies a condition for the DLP rule that looks for documents that are created by the specificed identity. You can specify multiple values separated by commas.

This parameter applies to Sharepoint and Onedrive workloads.

Parameter properties

Parameter sets

-DocumentCreatedByMemberOf

Applicable: Security & Compliance

The DocumentCreatedByMemberOf parameter specifies a condition for the DLP rule that looks for documents that are created by a member of the specificed group. You can specify multiple values separated by commas.

This parameter applies to Sharepoint and Onedrive workloads.

Parameter properties

Parameter sets

-DocumentIsPasswordProtected

Applicable: Security & Compliance

The DocumentIsPasswordProtected parameter specifies a condition for the DLP rule that looks for password protected files (because the contents of the file can't be inspected). Password detection works for Office documents, compressed files (.zip, .7z, .rar, .tar, etc.), and .pdf files. Valid values are:

• $true: Look for password protected files.
• $false: Don't look for password protected files.

Parameter properties

Parameter sets

-DocumentIsUnsupported

Applicable: Security & Compliance

The DocumentIsUnsupported parameter specifies a condition for the DLP rule that looks for files that can't be scanned. Valid values are:

• $true: Look for unsupported files that can't be scanned.
• $false: Don't look for unsupported files that can't be scanned.

Parameter properties

Parameter sets

-DocumentMatchesPatterns

Applicable: Security & Compliance

The DocumentMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in the content of message attachments by using regular expressions. Only supported attachment types are checked.

You can specify multiple text patterns by using the following syntax: "Regular expression1","Regular expression2",..."Regular expressionN".

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-DocumentNameMatchesPatterns

Applicable: Security & Compliance

The DocumentNameMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in the name of message attachments by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

Parameter properties

Parameter sets

-DocumentNameMatchesWords

Applicable: Security & Compliance

The DocumentNameMatchesWords parameter specifies a condition for the DLP rule that looks for words or phrases in the name of message attachments. You can specify multiple words or phrases separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 50.

Parameter properties

Parameter sets

-DocumentSizeOver

Applicable: Security & Compliance

The DocumentSizeOver parameter specifies a condition for the DLP rule that looks for messages where any attachment is greater than the specified size.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values might be rounded up to the nearest kilobyte.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-DomainCountOver

Applicable: Security & Compliance

The DomainCountOver parameter specifies a condition for the DLP rule that looks for messages where the number of recipient domains is greater than the specified value.

You can use this condition in DLP policies that are scoped only to Exchange. In PowerShell, you can use this parameter only inside an Advanced Rule.

Parameter properties

Parameter sets

-EncryptRMSTemplate

Applicable: Security & Compliance

The EncryptRMSTemplate parameter specifies an action for the DLP rule that applies rights management service (RMS) templates to files. You identify the RMS template by name. If the name contains spaces, enclose the name in quotation marks (").

Use the Get-RMSTemplate cmdlet to see the RMS templates that are available.

Parameter properties

Parameter sets

-EndpointDlpBrowserRestrictions

Applicable: Security & Compliance

{{ Fill EndpointDlpBrowserRestrictions Description }}

Parameter properties

Parameter sets

-EndpointDlpRestrictions

Applicable: Security & Compliance

Note: This parameter requires membership in the Compliance Administrator or Compliance Data Administrator roles in Microsoft Entra ID.

The EndpointDlpRestrictions parameter specifies the restricted endpoints for Endpoint DLP. This parameter uses the following syntax: @(@{"Setting"="<Setting>"; "Value"="<Value>}",@{"Setting"="<Setting>"; "Value"="<Value>"},...).

The <Setting> value is one of the supported values.

The available values for <Value> are: Audit, Block, Ignore, or Warn.

Example values:

• @{"Setting"="Print"; "Value"="Block"}
• @{"Setting"="CopyPaste"; "Value"="Block";}
• @{"Setting"="ScreenCapture"; "Value"="Block";}
• @{"Setting"="RemovableMedia"; "Value"="Block";}
• @{"Setting"="NetworkShare"; "Value"="Block";}
• @{"Setting"="Print"; "Value"="Audit";}
• @{"Setting"="UnallowedApps"; "Value"="notepad"; "value2"="Microsoft Notepad"}

When you use the values Block or Warn in this parameter, you also need to use the NotifyUser parameter.

You can view and configure the available restrictions with the Get-PolicyConfig and Set-PolicyConfig cmdlets.

For more information about Endpoint DLP, see Learn about Endpoint data loss prevention.

Parameter properties

Parameter sets

-EnforcePortalAccess

Applicable: Security & Compliance

The EnforcePortalAccess parameter specifies whether external recipients are required to view encrypted mail using the encrypted message portal when the ApplyBrandingTemplate action is also specified. Valid values are:

• $true: External recipients are required to use the encrypted message portal to view encrypted messages.
• $false: External recipients aren't required to use the encrypted message portal. Outlook can decrypt messages inline.

Parameter properties

Parameter sets

-EvaluateRulePerComponent

Applicable: Security & Compliance

The EvaluateRulePerComponent parameter specifies whether a match for conditions and exceptions in the rule is contained within the same message component. Valid values are:

• $true: A DLP rule match for conditions and exceptions must be in the same message component (for example, in the message body or in a single attachment).
• $false: A DLP rule match for conditions and exceptions can be anywhere in the message.

For example, say a DLP rule is configured to block messages that contain three or more Social Security numbers (SSNs). When the value of this parameter is $true, a message is blocked only if there are three or more SSNs in the message body, or there are three or more SSNs in a specific attachment. The DLP rule doesn't match and the message isn't blocked if there are two SSNs in the message body, one SSN in an attachment, and two SSNs in another attachment in the same email message.

This parameter works with the following conditions or exceptions only:

• Content contains
• Attachment contains
• Attachment is not labeled
• File extension is

Parameter properties

Parameter sets

-ExceptIfAccessScope

Applicable: Security & Compliance

The ExceptIfAccessScopeAccessScope parameter specifies an exception for the DLP rule that's based on the access scope of the content. The rule isn't applied to content that matches the specified access scope. Valid values are:

• InOrganization: The rule isn't applied to content that's accessible or delivered to a recipient inside the organization.
• NotInOrganization: The rule isn't applied to content that's accessible or delivered to a recipient outside the organization.
• None: The exception isn't used.

Parameter properties

Parameter sets

-ExceptIfAnyOfRecipientAddressContainsWords

Applicable: Security & Compliance

The ExceptIfAnyOfRecipientAddressContainsWords parameter specifies an exception for the DLP rule that looks for words or phrases in recipient email addresses. You can specify multiple words separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 600.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfAnyOfRecipientAddressMatchesPatterns

Applicable: Security & Compliance

The ExceptIfAnyOfRecipientAddressMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in recipient email addresses by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfContentCharacterSetContainsWords

Applicable: Security & Compliance

The ExceptIfContentCharacterSetContainsWords parameter specifies an exception for the rule that looks for character set names in messages.

To specify multiple words, this parameter uses the syntax: Word1,word2,...wordN. Don't use leading or trailing spaces.

Supported character sets are big5, din_66003, euc-jp, euc-kr, gb18030, gb2312, hz-gb-2312, iso-2022-jp, iso-2022-kr, iso-8859-1, iso-8859-13, iso-8859-15, iso-8859-2, iso-8859-3, iso-8859-4, iso-8859-5, iso-8859-6, iso-8859-7, iso-8859-8, iso-8859-9, koi8-r, koi8-u, ks_c_5601-1987, ns_4551-1, sen_850200_b, shift_jis, utf-7, utf-8, windows-1250, windows-1251, windows-1252, windows-1253, windows-1254, windows-1255, windows-1256, windows-1257, windows-1258, windows-874.

Parameter properties

Parameter sets

-ExceptIfContentContainsSensitiveInformation

Applicable: Security & Compliance

The ExceptIfContentContainsSensitiveInformation parameter specifies an exception for the rule that's based on a sensitive information type match in content. The rule isn't applied to content that contains the specified sensitive information type. In addition to sensitive information type, the parameter can also be applied to files that contain sensitivity labels.

This parameter uses the basic syntax @(@{Name="SensitiveInformationType1";[minCount="Value"],@{Name="SensitiveInformationType2";[minCount="Value"],...). For example, @(@{Name="U.S. Social Security Number (SSN)"; minCount="2"},@{Name="Credit Card Number"}). Example for sensitivity label: @(@{operator = "And"; groups = @(@{operator="Or";name="Default";labels=@(@{name="Confidential";type="Sensitivity"})})}).

Use the Get-DLPSensitiveInformationType cmdlet to list the sensitive information types for your organization. For more information on sensitive information types, see What the sensitive information types in Exchange look for.

Parameter properties

Parameter sets

-ExceptIfContentExtensionMatchesWords

Applicable: Security & Compliance

The ExceptIfContentExtensionMatchesWords parameter specifies an exception for the DLP rule that looks for words in file extensions. You can specify multiple words separated by commas. Irrespective of what the original file type is, this predicate matches based on the extension that is present in the name of the file.

Parameter properties

Parameter sets

-ExceptIfContentFileTypeMatches

Applicable: Security & Compliance

{{ Fill ExceptIfContentFileTypeMatches Description }}

Parameter properties

Parameter sets

-ExceptIfContentIsShared

Applicable: Security & Compliance

The ContentIsNotLabeled parameter specifies an exception for the DLP rule that looks for attachments or documents that aren't labeled. Valid values are:

• $true: Look for attachments or documents that aren't labeled.
• $false: Don't look for unlabeled attachments or documents.

In Exchange, this condition is matched only if both the attachment and the message body aren't labeled.

Parameter properties

Parameter sets

-ExceptIfContentPropertyContainsWords

Applicable: Security & Compliance

The ExceptIfContentPropertyContainsWords parameter specifies an exception for the DLP rule that's based on a property match in content. The rule is not applied to content that contains the specified property.

This parameter accepts values in the format: "Property1:Value1,Value2","Property2:Value3,Value4",..."PropertyN:ValueN,ValueN".

Parameter properties

Parameter sets

-ExceptIfDocumentContainsWords

Applicable: Security & Compliance

The ExceptIfDocumentContainsWords parameter specifies an exception for the DLP rule that looks for words in message attachments. Only supported attachment types are checked.

To specify multiple words or phrases, this parameter uses the syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfDocumentCreatedBy

Applicable: Security & Compliance

The DocumentCreatedBy parameter specifies an exception for the DLP rule that looks for documents that are created by the specificed identity. You can specify multiple values separated by commas.

This parameter applies to Sharepoint and Onedrive workloads.

Parameter properties

Parameter sets

-ExceptIfDocumentCreatedByMemberOf

Applicable: Security & Compliance

The DocumentCreatedByMemberOf parameter specifies an exception for the DLP rule that looks for documents that are created by a member of the specificed group. You can specify multiple values separated by commas.

This parameter applies to Sharepoint and Onedrive workloads.

Parameter properties

Parameter sets

-ExceptIfDocumentIsPasswordProtected

Applicable: Security & Compliance

The ExceptIfDocumentIsPasswordProtected parameter specifies an exception for the DLP rule that looks for password protected files (because the contents of the file can't be inspected). Password detection works for Office documents, compressed files (.zip, .7z, .rar, .tar, etc.), and .pdf files. Valid values are:

• $true: Look for password protected files.
• $false: Don't look for password protected files.

Parameter properties

Parameter sets

-ExceptIfDocumentIsUnsupported

Applicable: Security & Compliance

The ExceptIfDocumentIsUnsupported parameter specifies an exception for the DLP rule that looks for files that can't be scanned. Valid values are:

• $true: Look for unsupported files that can't be scanned.
• $false: Don't look for unsupported files that can't be scanned.

Parameter properties

Parameter sets

-ExceptIfDocumentMatchesPatterns

Applicable: Security & Compliance

The ExceptIfDocumentMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in the content of message attachments by using regular expressions. Only supported attachment types are checked.

You can specify multiple text patterns by using the following syntax: "Regular expression1","Regular expression2",..."Regular expressionN".

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfDocumentNameMatchesPatterns

Applicable: Security & Compliance

The ExceptIfDocumentNameMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in the name of message attachments by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

Parameter properties

Parameter sets

-ExceptIfDocumentNameMatchesWords

Applicable: Security & Compliance

The ExceptIfDocumentNameMatchesWords parameter specifies an exception for the DLP rule that looks for words or phrases in the name of message attachments. You can specify multiple words or phrases separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 50.

Parameter properties

Parameter sets

-ExceptIfDocumentSizeOver

Applicable: Security & Compliance

The ExceptIfDocumentSizeOver parameter specifies an exception for the DLP rule that looks for messages where any attachment is greater than the specified size.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values might be rounded up to the nearest kilobyte.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfFrom

Applicable: Security & Compliance

The ExceptIfFrom parameter specifies an exception for the DLP rule that looks for messages from specific senders. You identify the senders by email address. You can specify multiple values separated by commas.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfFromAddressContainsWords

Applicable: Security & Compliance

The ExceptIfFromAddressContainsWords parameter specifies an exception for the DLP rule that looks for words or phrases in the sender's email address. You can specify multiple words or phrases separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word length is 128 characters. The maximum number of words or phrases is 50.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfFromAddressMatchesPatterns

Applicable: Security & Compliance

The ExceptIfFromAddressMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in the sender's email address by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfFromMemberOf

Applicable: Security & Compliance

The FromMemberOf parameter specifies an exception for the DLP rule that looks for messages sent by group members. You identify the group by its email address.

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

Parameter properties

Parameter sets

-ExceptIfFromScope

Applicable: Security & Compliance

The ExceptIfFromScope parameter specifies an exception for the rule that looks for the location of message senders. Valid values are:

• InOrganization: The sender is a mailbox, mail user, group, or mail-enabled public folder in your organization or The sender's email address is in an accepted domain that's configured as an authoritative domain or an internal relay domain.
• NotInOrganization: The sender's email address isn't in an accepted domain or the sender's email address is in an accepted domain that's configured as an external relay domain.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfHasSenderOverride

Applicable: Security & Compliance

The ExceptIfHasSenderOverride parameter specifies an exception for the rule that looks for messages where the sender chose to override a DLP policy. Valid values are:

• $true: Look for messages where the sender took action to override a DLP policy.
• $false: Don't look for messages where the sender took action to override a DLP policy.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfHeaderContainsWords

Applicable: Security & Compliance

The HeaderContainsWords parameter specifies an exception for the DLP rule that looks for words in a header field.

To specify multiple words or phrases, this parameter uses the syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfHeaderMatchesPatterns

Applicable: Security & Compliance

The HeaderMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in a header field by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1","regular expression2",..."regular expressionN".

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfMessageSizeOver

Applicable: Security & Compliance

The ExceptIfMessageSizeOver parameter specifies an exception for the DLP rule that looks for messages larger than the specified size. The size include the message and all attachments.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values might be rounded up to the nearest kilobyte.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfMessageTypeMatches

Applicable: Security & Compliance

The ExceptIfMessageTypeMatches parameter specifies an exception for the rule that looks for messages of the specified type. Valid values are:

• ApprovalRequest: Moderation request messages sent to moderators.
• AutomaticForward: Messages automatically forwarded to an alternative recipient (by Exchange, not by auto-forwarding rules that users configure in Outlook on the web or Outlook).
• AutomaticReply: Out of office (OOF) messages configured by the user.
• Calendaring: Meeting requests and responses.
• Encrypted: S/MIME encrypted messages.
• PermissionControlled: Messages protected with Rights Management, Office 365 Message Encryption (OME), and sensitivity labels (with encryption).
• ReadReceipt: Read receipts.
• Signed: Digitally signed messages.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfProcessingLimitExceeded

Applicable: Security & Compliance

The ExceptIfProcessingLimitExceeded parameter specifies an exception for the DLP rule that looks for files where scanning couldn't complete. Valid values are:

• $true: Look for files where scanning couldn't complete.
• $false: Don't look for files where scanning couldn't complete.

Parameter properties

Parameter sets

-ExceptIfRecipientADAttributeContainsWords

Applicable: Security & Compliance

The ExceptIfRecipientADAttributeContainsWords parameter specifies an exception for the DLP rule that looks for words in Active Directory attributes of message recipients. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="Word"}. To specify multiple attributes, use the following syntax: @{AttributeName1="Word1";AttributeName2="Word2";...AttributeNameN="WordN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfRecipientADAttributeMatchesPatterns

Applicable: Security & Compliance

The ExceptIfRecipientADAttributeMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in Active Directory attributes of message recipients by using regular expressions. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="RegularExpression"}. To specify multiple attributes, use the following syntax: @{AttributeName1="RegularExpression1";AttributeName2="RegularExpression2";...AttributeNameN="RegularExpressionN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfRecipientDomainIs

Applicable: Security & Compliance

The ExceptIfRecipientDomainIs parameter specifies an exception for the DLP rule that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.

Parameter properties

Parameter sets

-ExceptIfSenderADAttributeContainsWords

Applicable: Security & Compliance

The ExceptIfSenderADAttributeContainsWords parameter specifies an exception for the DLP rule that looks for words in Active Directory attributes of message senders. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="Word"}. To specify multiple attributes, use the following syntax: @{AttributeName1="Word1";AttributeName2="Word2";...AttributeNameN="WordN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSenderADAttributeMatchesPatterns

Applicable: Security & Compliance

The ExceptIfSenderADAttributeMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in Active Directory attributes of message senders by using regular expressions. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="RegularExpression"}. To specify multiple attributes, use the following syntax: @{AttributeName1="RegularExpression1";AttributeName2="RegularExpression2";...AttributeNameN="RegularExpressionN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSenderDomainIs

Applicable: Security & Compliance

The ExceptIfSenderDomainIs parameter specifies an exception for the DLP rule that looks for messages from senders with email address in the specified domains. You can specify multiple values separated by commas.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSenderIPRanges

Applicable: Security & Compliance

The ExceptIfSenderIpRanges parameter specifies an exception for the DLP rule that looks for senders whose IP addresses matches the specified value, or fall within the specified ranges. Valid values are:

• Single IP address: For example, 192.168.1.1.
• IP address range: For example, 192.168.0.1-192.168.0.254.
• Classless InterDomain Routing (CIDR) IP address range: For example, 192.168.0.1/25.

You can specify values separated by commas.

Parameter properties

Parameter sets

-ExceptIfSentTo

Applicable: Security & Compliance

The ExceptIfSentTo parameter specifies an exception for the DLP rule that looks for recipients in messages. You identify the recipients by email address. You can specify multiple values separated by commas.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSentToMemberOf

Applicable: Security & Compliance

The ExceptIfSentToMemberOf parameter specifies an exception for the DLP rule that looks for messages sent to members of distribution groups, dynamic distribution groups, or mail-enabled security groups. You identify the groups by email address. You can specify multiple values separated by commas.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSubjectContainsWords

Applicable: Security & Compliance

The ExceptIfSubjectContainsWords parameter specifies an exception for the DLP rule that looks for words or phrases in the Subject field of messages. You can specify multiple words or phrases separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 50.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSubjectMatchesPatterns

Applicable: Security & Compliance

The ExceptIfSubjectMatchesPatterns parameter specifies an exception for the DLP rule that looks for text patterns in the Subject field of messages by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSubjectOrBodyContainsWords

Applicable: Security & Compliance

The ExceptIfSubjectOrBodyContainsWords parameter specifies an exception for the rule that looks for words in the Subject field or body of messages.

To specify multiple words or phrases, this parameter uses the syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfSubjectOrBodyMatchesPatterns

Applicable: Security & Compliance

The ExceptIfSubjectOrBodyMatchesPatterns parameter specifies an exception for the rule that looks for text patterns in the Subject field or body of messages. You can specify multiple text patterns by using the following syntax: "regular expression1","regular expression2",..."regular expressionN".

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExceptIfUnscannableDocumentExtensionIs

Applicable: Security & Compliance

The ExceptIfUnscannableDocumentExtensionIs parameter specifies an exception for the rule that looks for the specified true file extension when the files aren't scannable. Irrespective of what the original file type is, this predicate matches based on the extension that is present in the name of the file.

You can specify multiple values separated by commas.

Parameter properties

Parameter sets

-ExceptIfWithImportance

Applicable: Security & Compliance

The ExceptIfWithImportance parameter specifies an exception for the rule that looks for messages with the specified importance level. Valid values are:

• Low
• Normal
• High

You can use this exception in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ExpiryDate

Applicable: Security & Compliance

This parameter is reserved for internal Microsoft use.

Parameter properties

Parameter sets

-From

Applicable: Security & Compliance

The From parameter specifies a condition for the DLP rule that looks for messages from specific senders. You identify the senders by email address. You can specify multiple values separated by commas.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-FromAddressContainsWords

Applicable: Security & Compliance

The FromAddressContainsWords parameter specifies a condition for the DLP rule that looks for words or phrases in the sender's email address. You can specify multiple words or phrases separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word length is 128 characters. The maximum number of words or phrases is 50.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-FromAddressMatchesPatterns

Applicable: Security & Compliance

The FromAddressMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in the sender's email address by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-FromMemberOf

Applicable: Security & Compliance

The FromMemberOf parameter specifies a condition for the DLP rule that looks for messages sent by group members. You identify the group by its email address.

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN".

Parameter properties

Parameter sets

-FromScope

Applicable: Security & Compliance

The FromScope parameter specifies a condition for the rule that looks for the location of message senders. Valid values are:

• InOrganization: The sender is a mailbox, mail user, group, or mail-enabled public folder in your organization or The sender's email address is in an accepted domain that's configured as an authoritative domain or an internal relay domain.
• NotInOrganization: The sender's email address isn't in an accepted domain or the sender's email address is in an accepted domain that's configured as an external relay domain.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-GenerateAlert

Applicable: Security & Compliance

The GenerateAlert parameter specifies an action for the DLP rule that notifies the specified users when the conditions of the rule are met. Valid values are:

• An email address.
• SiteAdmin

You can specify multiple values separated by commas.

The email message that's generated by this action contains a link to detailed information in the Microsoft Purview compliance portal (the details aren't in the email message itself).

Parameter properties

Parameter sets

-GenerateIncidentReport

Applicable: Security & Compliance

The GenerateIncidentReport parameter specifies an action for the DLP rule that sends an incident report to the specified users when the conditions of the rule are met. Valid values are:

• An email address.
• SiteAdmin

You can specify multiple values separated by commas.

Parameter properties

Parameter sets

-HasSenderOverride

Applicable: Security & Compliance

The SenderOverride parameter specifies a condition for the rule that looks for messages where the sender chose to override a DLP policy. Valid values are:

• $true: Look for messages where the sender took action to override a DLP policy.
• $false: Don't look for messages where the sender took action to override a DLP policy.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-HeaderContainsWords

Applicable: Security & Compliance

The HeaderContainsWords parameter specifies a condition for the DLP rule that looks for words in a header field.

To specify multiple words or phrases, this parameter uses the syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-HeaderMatchesPatterns

Applicable: Security & Compliance

The HeaderMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in a header field by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1","regular expression2",..."regular expressionN".

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ImmutableId

Applicable: Security & Compliance

This parameter is reserved for internal Microsoft use.

Parameter properties

Parameter sets

-IncidentReportContent

Applicable: Security & Compliance

The IncidentReportContent parameter specifies the content to include in the report when you use the GenerateIncidentReport parameter. Valid values are:

• All
• Default
• DetectionDetails
• Detections
• DocumentAuthor
• DocumentLastModifier
• MatchedItem
• OriginalContent
• RulesMatched
• Service
• Severity
• Title

You can specify multiple values separated by commas. You can only use the value "All" by itself. If you use the value "Default", the report includes the following content:

• DocumentAuthor
• MatchedItem
• RulesMatched
• Service
• Title

Therefore, any additional values that you use with the value "Default" are ignored.

Parameter properties

Parameter sets

-MessageIsNotLabeled

Applicable: Security & Compliance

{{ Fill MessageIsNotLabeled Description }}

Parameter properties

Parameter sets

-MessageSizeOver

Applicable: Security & Compliance

The MessageSizeOver parameter specifies a condition for the DLP rule that looks for messages larger than the specified size. The size include the message and all attachments.

When you enter a value, qualify the value with one of the following units:

• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
• TB (terabytes)

Unqualified values are typically treated as bytes, but small values might be rounded up to the nearest kilobyte.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-MessageTypeMatches

Applicable: Security & Compliance

The MessageTypeMatches parameter specifies a condition for the rule that looks for messages of the specified type. Valid values are:

• ApprovalRequest: Moderation request messages sent to moderators.
• AutomaticForward: Messages automatically forwarded to an alternative recipient (by Exchange, not by auto-forwarding rules that users configure in Outlook on the web or Outlook).
• AutomaticReply: Out of office (OOF) messages configured by the user.
• Calendaring: Meeting requests and responses.
• Encrypted: S/MIME encrypted messages.
• PermissionControlled: Messages protected with Rights Management, Office 365 Message Encryption (OME), and sensitivity labels (with encryption).
• ReadReceipt: Read receipts.
• Signed: Digitally signed messages.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-MipRestrictAccess

Applicable: Security & Compliance

{{ Fill MipRestrictAccess Description }}

Parameter properties

Parameter sets

-Moderate

Applicable: Security & Compliance

The Moderate parameter specifies an action for the DLP rule that sends the email message to a moderator. This parameter uses the syntax: @{ModerateMessageByManager = <$true | $false>; ModerateMessageByUser = "emailaddress1,emailaddress2,...emailaddressN"}.

You can use this action in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ModifySubject

Applicable: Security & Compliance

The ModifySubject parameter uses regular expressions to find text patterns in the subject of the email message, and then modifies the subject with the text that you specify. This parameter uses the syntax: @{Patterns="RegEx1","RegEx2",..."RegEx10}"; SubjectText="Replacement Text"; ReplaceStrategy="Value"}.

The ReplaceStrategy= property uses one of the following values:

• Replace: Replaces all regular expression matches (the Patterns= value) in the subject with the SubjectText= value.
• Append: Removes all regular expression matches (the Patterns= value) in the subject and inserts the SubjectText= value at the end of the subject.
• Prepend: Removes all regular expression matches (the Patterns= value) and inserts the SubjectText= value at the beginning of the subject.

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 10.

Parameter properties

Parameter sets

-Name

Applicable: Security & Compliance

The Name parameter specifies the unique name of the new DLP rule. If the value contains spaces, enclose the value in quotation marks.

Parameter properties

Parameter sets

-NonBifurcatingAccessScope

Applicable: Security & Compliance

The NonBifurcatingAccessScope parameter specifies a condition for the DLP rule that looks for recipients in the specified access scope. The rule is applied to all copies of the message. Valid values are:

• HasInternal: At least one recipient is inside the organization.
• HasExternal: At least one recipient is outside the organization.
• None: The condition isn't used.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-NotifyAllowOverride

Applicable: Security & Compliance

The NotifyAllowOverride parameter specifies the notification override options when the conditions of the rule are met. Valid values are:

• FalsePositive: Allows overrides in the case of false positives.
• WithAcknowledgement: Allows overrides with explicit user acknowledgement. (Exchange only)
• WithoutJustification: Allows overrides without justification.
• WithJustification: Allows overrides with justification.

You can specify multiple values separated by commas. The values WithoutJustification and WithJustification are mutually exclusive.

Parameter properties

Parameter sets

-NotifyEmailCustomSenderDisplayName

Applicable: Security & Compliance

{{ Fill NotifyEmailCustomSenderDisplayName Description }}

Parameter properties

Parameter sets

-NotifyEmailCustomSubject

Applicable: Security & Compliance

The NotifyEmailCustomSubject parameter specifies the custom text in the subject line of email notification message that's sent to recipients when the conditions of the rule are met.

Parameter properties

Parameter sets

-NotifyEmailCustomText

Applicable: Security & Compliance

The NotifyEmailCustomText parameter specifies the custom text in the email notification message that's sent to recipients when the conditions of the rule are met.

This parameter has a 5000 character limit, and supports plain text, HTML tags, and the following tokens (variables):

• %%AppliedActions%%: The actions applied to the content.
• %%ContentURL%%: The URL of the document on the SharePoint site or OneDrive site.
• %%MatchedConditions%%: The conditions that were matched by the content. Use this token to inform people of possible issues with the content.
• %%BlockedMessageInfo%%: The details of the message that was blocked. Use this token to inform people of the details of the message that was blocked.

Parameter properties

Parameter sets

-NotifyEmailExchangeIncludeAttachment

Applicable: Security & Compliance

{{ Fill NotifyEmailExchangeIncludeAttachment Description }}

Parameter properties

Parameter sets

-NotifyEmailOnedriveRemediationActions

Applicable: Security & Compliance

{{ Fill NotifyEmailOnedriveRemediationActions Description }}

Parameter properties

Parameter sets

-NotifyEndpointUser

Applicable: Security & Compliance

Note: This parameter requires membership in the Compliance Administrator or Compliance Data Administrator roles in Microsoft Entra ID.

{{ Fill NotifyEndpointUser Description }}

For more information about Endpoint DLP, see Learn about Endpoint data loss prevention.

Parameter properties

Parameter sets

-NotifyOverrideRequirements

Applicable: Security & Compliance

{{ Fill NotifyOverrideRequirements Description }}

Parameter properties

Parameter sets

-NotifyPolicyTipCustomDialog

Applicable: Security & Compliance

{{ Fill NotifyPolicyTipCustomDialog Description }}

Parameter properties

Parameter sets

-NotifyPolicyTipCustomText

Applicable: Security & Compliance

The NotifyPolicyTipCustomText parameter specifies the custom text in the Policy Tip notification message that's shown to recipients when the conditions of the rule are met. The maximum length is 256 characters. HTML tags and tokens (variables) aren't supported.

Parameter properties

Parameter sets

-NotifyPolicyTipCustomTextTranslations

Applicable: Security & Compliance

The NotifyPolicyTipCustomTextTranslations parameter specifies the localized policy tip text that's shown when the conditions of the rule are met, based on the client settings. This parameter uses the syntax CultureCode:Text.

Valid culture codes are supported values from the Microsoft .NET Framework CultureInfo class. For example, da-DK for Danish or ja-JP for Japanese. For more information, see CultureInfo Class.

To enter multiple values, use the following syntax: "Value1","Value2",..."ValueN". For example: "en:PolicyTipInEnglish","zh:警告：这个文件含有非法内容","th:คำแนะนำนโยบายในไทย".

Parameter properties

Parameter sets

-NotifyPolicyTipDisplayOption

Applicable: Security & Compliance

The NotifyPolicyTipDialogOption parameter specifies a display option for the policy tip. Valid values are:

• Tip: Displays policy tip at the top of the mail. This value is the default.
• Dialog: Displays policy tip at the top of the mail and as a popup dialog. (exchange only)

Parameter properties

Parameter sets

-NotifyPolicyTipUrl

Applicable: Security & Compliance

The NotifyPolicyTipUrl parameter specifies the URL in the popup dialog for Exchange workloads. This URL value has priority over the global: Set-PolicyConfig -ComplianceUrl.

Parameter properties

Parameter sets

-NotifyUser

Applicable: Security & Compliance

The NotifyUser parameter specifies an action for the DLP rule that notifies the specified users when the conditions of the rule are met. Valid values are:

• An email address.
• LastModifier
• Owner
• SiteAdmin

You can specify multiple values separated by commas.

Parameter properties

Parameter sets

-NotifyUserType

Applicable: Security & Compliance

The NotifyUserType parameter specifies the type of notification that's used for the rule. Valid values are:

• NotSet
• Email
• PolicyTip
• Email,PolicyTip

Parameter properties

Parameter sets

-OnPremisesScannerDlpRestrictions

Applicable: Security & Compliance

{{ Fill OnPremisesScannerDlpRestrictions Description }}

Parameter properties

Parameter sets

-Policy

Applicable: Security & Compliance

The Policy parameter specifies the existing DLP policy that contains the new DLP rule. You can use any value that uniquely identifies the policy. For example:

• Name
• Distinguished name (DN)
• GUID
• Id

Parameter properties

Parameter sets

-PrependSubject

Applicable: Security & Compliance

The PrependSubject parameter specifies an action for the rule that adds text to add to the beginning of the Subject field of messages. The value for this parameter is text that you specify. If the text contains spaces, enclose the value in quotation marks (").

Consider ending the value for this parameter with a colon (:) and a space, or at least a space, to separate it from the original subject.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-Priority

Applicable: Security & Compliance

The Priority parameter specifies a priority value for the rule that determines the order of rule processing within the policy. A lower integer value indicates a higher priority, the value 0 is the highest priority, and rules can't have the same priority value.

Valid values and the default value for this parameter depend on the number of existing rules in the policy. For example, if there are 8 existing rules:

• Valid priority values for the existing 8 rules are from 0 through 7.
• Valid priority values for a new 9th rule that you add to the policy are from 0 through 8.
• The default value for a new 9th rule that you add to the policy is 8.

If you modify the priority value of a rule, the position of the rule in the list changes to match the priority value you specify. In other words, if you set the priority value of a rule to the same value as an existing rule, the priority value of the existing rule and all other lower priority rules after it is increased by 1.

Parameter properties

Parameter sets

-ProcessingLimitExceeded

Applicable: Security & Compliance

The ProcessingLimitExceeded parameter specifies a condition for the DLP rule that looks for files where scanning couldn't complete. You can use this condition to create rules that work together to identify and process messages where the content couldn't be fully scanned. Valid values are:

• $true: Look for files where scanning couldn't complete.
• $false: Don't look for files where scanning couldn't complete.

Parameter properties

Parameter sets

-Quarantine

Applicable: Security & Compliance

This parameter specifies an action or part of an action for the rule.

The Quarantine parameter specifies an action that quarantines messages. Valid values are:

• $true: The message is delivered to the hosted quarantine.
• $false: The message is not quarantined.

Parameter properties

Parameter sets

-RecipientADAttributeContainsWords

Applicable: Security & Compliance

The RecipientADAttributeContainsWords parameter specifies a condition for the DLP rule that looks for words in Active Directory attributes of message recipients. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="Word"}. To specify multiple attributes, use the following syntax: @{AttributeName1="Word1";AttributeName2="Word2";...AttributeNameN="WordN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-RecipientADAttributeMatchesPatterns

Applicable: Security & Compliance

The RecipientADAttributeMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in Active Directory attributes of message recipients by using regular expressions. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="RegularExpression"}. To specify multiple attributes, use the following syntax: @{AttributeName1="RegularExpression1";AttributeName2="RegularExpression2";...AttributeNameN="RegularExpressionN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-RecipientCountOver

Applicable: Security & Compliance

The RecipientCountOver parameter specifies a condition for the DLP rule that looks for messages where the number of recipients is greater than the specified value. Groups are counted as one recipient.

You can use this condition in DLP policies that are scoped only to Exchange. In PowerShell, you can use this parameter only inside an Advanced Rule.

Parameter properties

Parameter sets

-RecipientDomainIs

Applicable: Security & Compliance

The RecipientDomainIs parameter specifies a condition for the DLP rule that looks for recipients with email addresses in the specified domains. You can specify multiple domains separated by commas.

Parameter properties

Parameter sets

-RedirectMessageTo

Applicable: Security & Compliance

The RedirectMessageTo parameter specifies an action for the DLP rule that redirects the message to the specified email address. You can specify multiple values separated by commas.

You can use this action in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-RemoveHeader

Applicable: Security & Compliance

The RemoveHeader parameter specifies an action for the DLP rule that removes a header field from the message header. This parameter uses the syntax HeaderName or "HeaderName:HeaderValue".You can specify multiple header names or header name and value pairs separated by commas: HeaderName1,"HeaderName2:HeaderValue2",HeaderName3,..."HeaderNameN:HeaderValueN".

The maximum header name length is 64 characters, and header names can't contains spaces or colons ( : ). The maximum header value length is 128 characters.

You can use this action in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-RemoveRMSTemplate

Applicable: Security & Compliance

The RemoveRMSTemplate parameter specifies an action for the DLP rule that removes Microsoft Purview Message Encryption from messages and their attachments. Valid values are:

• $true: The message and attachments are decrypted.
• $False: The messages and attachments are not decrypted.

You can use this action in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ReportSeverityLevel

Applicable: Security & Compliance

The ReportSeverityLevel parameter specifies the severity level of the incident report for content detections based on the rule. Valid values are:

• None: You can't select this value if the rule has no actions configured.
• Low: This value is the default.
• Medium
• High

Parameter properties

Parameter sets

-RestrictAccess

Applicable: Security & Compliance

{{ Fill RestrictAccess Description }}

Parameter properties

Parameter sets

-RestrictBrowserAccess

Applicable: Security & Compliance

{{ Fill RestrictBrowserAccess Description }}

Parameter properties

Parameter sets

-RuleErrorAction

Applicable: Security & Compliance

The RuleErrorAction parameter specifies what to do if an error is encountered during the evaluation of the rule. Valid values are:

• Ignore
• RetryThenBlock
• Blank (the value $null): This value is the default.

Parameter properties

Parameter sets

-SenderADAttributeContainsWords

Applicable: Security & Compliance

The SenderADAttributeContainsWords parameter specifies a condition for the DLP rule that looks for words in Active Directory attributes of message senders. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="Word"}. To specify multiple attributes, use the following syntax: @{AttributeName1="Word1";AttributeName2="Word2";...AttributeNameN="WordN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SenderADAttributeMatchesPatterns

Applicable: Security & Compliance

The SenderADAttributeMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in Active Directory attributes of message senders by using regular expressions. You can use any of the following Active Directory attributes:

• City
• Company
• Country or Region
• CustomAttribute1 to CustomAttribute15
• Department
• DisplayName
• Email Addresses
• Fax
• FirstName
• HomePhoneNumber
• Initials
• LastName
• Manager
• Mobile Phone
• Notes
• Office
• OtherFax
• OtherHomePhone
• Other Telephone
• Pager
• Phone
• Post Office Box
• State or Province
• Street Address
• Title
• UserLogonName
• Postal Code

This parameter uses the syntax: @{AttributeName="RegularExpression"}. To specify multiple attributes, use the following syntax: @{AttributeName1="RegularExpression1";AttributeName2="RegularExpression2";...AttributeNameN="RegularExpressionN"}. Don't use words with leading or trailing spaces.

When you specify multiple attributes, the OR operator is used.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SenderAddressLocation

Applicable: Security & Compliance

The SenderAddressLocation parameter specifies where to look for sender addresses in conditions and exceptions that examine sender email addresses. Valid values are:

• Header: Only examine senders in the message headers (for example, the From, Sender, or Reply-To fields). This value is the default.
• Envelope: Only examine senders from the message envelope (the MAIL FROM value that was used in the SMTP transmission, which is typically stored in the Return-Path field).
• HeaderOrEnvelope: Examine senders in the message header and the message envelope.

Message envelope searching is available only for the following conditions and exceptions:

• From and ExceptIfFrom
• FromAddressContainsWords and ExceptIfFromAddressContainsWords
• FromAddressMatchesPatterns and ExceptIfFromAddressMatchesPatterns
• FromMemberOf and ExceptIfFromMemberOf
• SenderDomainIs and ExceptIfSenderDomainIs

Parameter properties

Parameter sets

-SenderDomainIs

Applicable: Security & Compliance

The SenderDomainIs parameter specifies a condition for the DLP rule that looks for messages from senders with email address in the specified domains. You can specify multiple values separated by commas.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SenderIPRanges

Applicable: Security & Compliance

The SenderIpRanges parameter specifies a condition for the DLP rule that looks for senders whose IP addresses matches the specified value or fall within the specified ranges. Valid values are:

• Single IP address: For example, 192.168.1.1.
• IP address range: For example, 192.168.0.1-192.168.0.254.
• Classless InterDomain Routing (CIDR) IP address range: For example, 192.168.0.1/25.

You can specify multiple values separated by commas.

Parameter properties

Parameter sets

-SentTo

Applicable: Security & Compliance

The SentTo parameter specifies a condition for the DLP rule that looks for recipients in messages. You identify the recipients by email address. You can specify multiple values separated by commas.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SentToMemberOf

Applicable: Security & Compliance

The SentToMemberOf parameter specifies a condition for the DLP rule that looks for messages sent to members of distribution groups, dynamic distribution groups, or mail-enabled security groups. You identify the groups by email address. You can specify multiple values separated by commas.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SetHeader

Applicable: Security & Compliance

The SetHeader parameter specifies an action for the DLP rule that adds or modifies a header field and value in the message header. This parameter uses the syntax "HeaderName:HeaderValue". You can specify multiple header name and value pairs separated by commas: "HeaderName1:HeaderValue1",HeaderName2:HeaderValue2",..."HeaderNameN:HeaderValueN".

The maximum header name length is 64 characters, and header names can't contains spaces or colons ( : ). The maximum header value length is 128 characters.

You can use this action in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SharedByIRMUserRisk

Applicable: Security & Compliance

The SharedByIRMUserRisk parameter specifies the risk category of the user performing the violating action. Valid values are:

• FCB9FA93-6269-4ACF-A756-832E79B36A2A (Elevated Risk Level)
• 797C4446-5C73-484F-8E58-0CCA08D6DF6C (Moderate Risk Level)
• 75A4318B-94A2-4323-BA42-2CA6DB29AAFE (Minor Risk Level)

You can specify multiple values separated by commas.

Parameter properties

Parameter sets

-StopPolicyProcessing

Applicable: Security & Compliance

The StopPolicyProcessing parameter specifies an action that stops processing more DLP policy rules. Valid values are:

• $true: Stop processing more rules.
• $false: Continue processing more rules after this one.

Parameter properties

Parameter sets

-SubjectContainsWords

Applicable: Security & Compliance

The SubjectContainsWords parameter specifies a condition for the DLP rule that looks for words or phrases in the Subject field of messages. You can specify multiple words or phrases separated by commas.

• Single word: "no_reply"
• Multiple words: no_reply,urgent,...
• Multiple words and phrases: "phrase 1",word1,"phrase with , or spaces",word2,...

The maximum individual word or phrase length is 128 characters. The maximum number of words or phrases is 50.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SubjectMatchesPatterns

Applicable: Security & Compliance

The SubjectMatchesPatterns parameter specifies a condition for the DLP rule that looks for text patterns in the Subject field of messages by using regular expressions. You can specify multiple text patterns by using the following syntax: "regular expression1"|"regular expression2"|..."regular expressionN".

The maximum individual regular expression length is 128 characters. The maximum number of regular expressions is 300.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SubjectOrBodyContainsWords

Applicable: Security & Compliance

The SubjectOrBodyContainsWords parameter specifies a condition for the rule that looks for words in the Subject field or body of messages.

To specify multiple words or phrases, this parameter uses the syntax: Word1,"Phrase with spaces",word2,...wordN. Don't use leading or trailing spaces.

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-SubjectOrBodyMatchesPatterns

Applicable: Security & Compliance

The SubjectOrBodyMatchesPatterns parameter specifies a condition for the rule that looks for text patterns in the Subject field or body of messages. You can specify multiple text patterns by using the following syntax: "regular expression1","regular expression2",..."regular expressionN".

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

-ThirdPartyAppDlpRestrictions

Applicable: Security & Compliance

{{ Fill ThirdPartyAppDlpRestrictions Description }}

Parameter properties

Parameter sets

-TriggerPowerAutomateFlow

Applicable: Security & Compliance

{{ Fill TriggerPowerAutomateFlow Description }}

Parameter properties

Parameter sets

-UnscannableDocumentExtensionIs

Applicable: Security & Compliance

The UnscannableDocumentExtensionIs parameter specifies a condition for the rule that looks for the specified true file extension when the files aren't scannable. Irrespective of the original file type, this predicate matches based on the extension that is present in the name of the file.

You can specify multiple values separated by commas.

Parameter properties

Parameter sets

-ValidateRule

Applicable: Security & Compliance

{{ Fill ValidateRule Description }}

Parameter properties

Parameter sets

-WhatIf

Applicable: Security & Compliance

The WhatIf switch doesn't work in Security & Compliance PowerShell.

Parameter properties

Parameter sets

-WithImportance

Applicable: Security & Compliance

The WithImportance parameter specifies a condition for the rule that looks for messages with the specified importance level. Valid values are:

• Low
• Normal
• High

You can use this condition in DLP policies that are scoped only to Exchange.

Parameter properties

Parameter sets

CommonParameters