New-ComplianceRetentionEvent
This cmdlet is available only in Security & Compliance PowerShell. For more information, see Security & Compliance PowerShell.
Use the New-ComplianceRetentionEvent cmdlet to create compliance retention events in your organization.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
New-ComplianceRetentionEvent
-Name <String>
[-AssetId <String>]
[-Comment <String>]
[-Confirm]
[-DomainController <Fqdn>]
[-EventDateTime <DateTime>]
[-EventTags <MultiValuedProperty>]
[-EventType <ComplianceRuleIdParameter>]
[-ExchangeAssetIdQuery <String>]
[-PreviewOnly]
[-SharePointAssetIdQuery <String>]
[-WhatIf]
[<CommonParameters>]
Description
To use this cmdlet in Security & Compliance PowerShell, you need to be assigned permissions. For more information, see Permissions in the Microsoft Purview compliance portal.
Examples
Example 1
New-ComplianceRetentionEvent -Name "Research Project Employees" -EventTag 80e0d620-13ea-4ed9-b6a6-aa883278bcca -EventType e823b782-9a07-4e30-8091-034fc01f9347 -SharePointAssetIDQuery "EmployeeNumber:123456 EmployeeNumber:456789"
This example creates a compliance retention event named Research Project Employees with the following settings:
- EventTag: 80e0d620-13ea-4ed9-b6a6-aa883278bcca
- EventTpe: e823b782-9a07-4e30-8091-034fc01f9347
- SharePointAssetIDQuery: EmployeeNumber:123456 EmployeeNumber:456789
Parameters
-AssetId
Applicable: Security & Compliance
The AssetId parameter specifies the Property:Value pair found in the properties of SharePoint or OneDrive documents that's used for retention. For example:
- Product codes that you can use to retain content for only a specific product.
- Project codes that you can use to retain content for only a specific project.
- Employee IDs that you can use to retain content for only a specific person.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Comment
Applicable: Security & Compliance
The Comment parameter specifies an optional comment. If you specify a value that contains spaces, enclose the value in quotation marks ("), for example: "This is an admin note".
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Security & Compliance
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Security & Compliance
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EventDateTime
Applicable: Security & Compliance
The EventDateTime parameter specifies the date-time of the event.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EventTags
Applicable: Security & Compliance
The EventTags parameter specifies the GUID value of the labels that are associated with the compliance retention event. Run the following command to see the available GUID values: Get-ComplianceTag | Format-Table Name,GUID.
You can specify multiple values separated by commas.
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EventType
Applicable: Security & Compliance
The EventType parameter specifies the GUID value of the event that starts the retention period for labels that use this event type. Run the following command to see the available GUID values: Get-ComplianceRetentionEventType | Format-Table Name,GUID.
Parameter properties
| Type: | ComplianceRuleIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ExchangeAssetIdQuery
Applicable: Security & Compliance
The ExchangeAssetIdQuery parameter specifies the keywords that are used to scope Exchange content for the compliance retention event. For details, see Keyword queries and search conditions for Content Search.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Name
Applicable: Security & Compliance
The Name parameter specifies a unique name for the compliance retention event. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PreviewOnly
Applicable: Security & Compliance
{{ Fill PreviewOnly Description }}
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SharePointAssetIdQuery
Applicable: Security & Compliance
The SharePointAssetIdQuery parameter specifies one or more the Property:Value pairs that you've specified in the properties (also known as Columns) of SharePoint and OneDrive documents to scope the compliance retention event.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Security & Compliance
The WhatIf switch doesn't work in Security & Compliance PowerShell.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.