Get-MoveRequestStatistics
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
Use the Get-MoveRequestStatistics cmdlet to view detailed information about move requests.
Some of the failure messages that are returned by this cmdlet are temporary and don't indicate that a request has actually failed. If the Status value is Queued or InProgress, then the request is proceeding normally.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
IdentityOnPremises
Get-MoveRequestStatistics
[-Identity] <MoveRequestIdParameter>
[-Diagnostic]
[-DiagnosticArgument <String>]
[-DomainController <Fqdn>]
[-IncludeReport]
[-ReportOnly]
[<CommonParameters>]
IdentityCloud
Get-MoveRequestStatistics
[-Identity] <MoveRequestIdParameter>
[-Analysis]
[-DiagnosticInfo <String>]
[-DiagnosticOnly]
[-IncludeReport]
[-ProxyToMailbox <MailboxIdParameter>]
[-ReportOnly]
[<CommonParameters>]
MigrationMoveRequestQueue
Get-MoveRequestStatistics
-MoveRequestQueue <DatabaseIdParameter>
[-MailboxGuid <Guid>]
[-Diagnostic]
[-DiagnosticArgument <String>]
[-DomainController <Fqdn>]
[-IncludeReport]
[-ReportOnly]
[<CommonParameters>]
MigrationMRSInstance
Get-MoveRequestStatistics
-MRSInstance <Fqdn>
[-MailboxGuid <Guid>]
[-DomainController <Fqdn>]
[<CommonParameters>]
Description
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-MoveRequestStatistics -Identity Tony@contoso.com
This example returns the default statistics for Tony Smith's mailbox, which include the status, mailbox size, archive mailbox size, and the percentage complete.
Example 2
Get-MoveRequestStatistics -Identity "contoso\tony" | Format-List
This example returns the detailed statistics for Tony Smith's mailbox by pipelining the results to the Format-List command.
Example 3
Get-MoveRequestStatistics -Identity Tony@contoso.com -IncludeReport | Export-CSV C:\MRStats.csv
This example returns additional information about the mailbox move for Tony Smith's mailbox and exports the report to a .csv file.
Example 4
Get-MoveRequestStatistics -MoveRequestQueue "MBXDB02"
This example returns default statistics for all mailboxes whose move requests are in progress or haven't been cleared for the database MBXDB02.
Example 5
Get-MoveRequestStatistics -MRSInstance CAS01.contoso.com -MailboxGuid b6a6795c-a010-4f67-aaaa-da372d56fcb9
In Exchange Server 2010, this example returns default statistics for a mailbox that is moved by the instance of the Microsoft Exchange Mailbox Replication service running on the server CAS01.
Example 6
Get-MoveRequestStatistics tony@contoso.com -IncludeReport -DiagnosticInfo Verbose | Export-Clixml "C:\Data\MoveReport.xml"
This example exports the move request information so you can later import it into the MRS_Explorer.ps1 script for analysis. For more information, see MRS-Explorer.
Parameters
-Analysis
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
{{ Fill Analysis Description }}
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityCloud
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Diagnostic
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The Diagnostic switch specifies whether to return extremely detailed information in the results. You don't need to specify a value with this switch.
Typically, you use this switch only at the request of Microsoft Customer Service and Support to troubleshoot problems.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityOnPremises
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
MigrationMoveRequestQueue
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DiagnosticArgument
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The DiagnosticArgument parameter modifies the results that are returned by using the Diagnostic switch. Typically, you use the Diagnostic switch and the DiagnosticArgument parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityOnPremises
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
MigrationMoveRequestQueue
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DiagnosticInfo
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
Typically, you use the DiagnosticInfo parameter only at the request of Microsoft Customer Service and Support to troubleshoot problems. Valid values are:
- ShowTimeline
- ShowTimeslot
- Verbose
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityCloud
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DiagnosticOnly
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
{{ Fill DiagnosticOnly Description }}
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityCloud
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityOnPremises
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
MigrationMoveRequestQueue
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
MigrationMRSInstance
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Identity parameter specifies the identity of the mailbox or mail user. You can use one of the following values:
- GUID
- Distinguished name (DN)
- Domain\Account
- User principal name (UPN)
- Legacy Exchange DN
- SMTP address
- Alias
You can use this parameter with the MoveRequestQueue or MailboxGuid parameters.
Parameter properties
| Type: | MoveRequestIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityOnPremises
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
IdentityCloud
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-IncludeReport
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The IncludeReport switch specifies whether to return additional details, which can be used for troubleshooting. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityOnPremises
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
IdentityCloud
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
MigrationMoveRequestQueue
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MailboxGuid
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The MailboxGuid parameter specifies the GUID of a mailbox for which you want to view the move request statistics.
You can't use this parameter with the Identity parameter.
Parameter properties
| Type: | Guid |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
MigrationMoveRequestQueue
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
MigrationMRSInstance
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MoveRequestQueue
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
This parameter is for debugging purposes only.
The MoveRequestQueue parameter specifies the mailbox database on which the move request resides. You can use any value that uniquely identifies the database. For example:
- Name
- Distinguished name (DN)
- GUID
You can't use this parameter with the Identity or MRSInstance parameters.
Parameter properties
| Type: | DatabaseIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
MigrationMoveRequestQueue
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MRSInstance
Applicable: Exchange Server 2010
This parameter is available only in Exchange Server 2010.
The MRSInstance parameter specifies the fully qualified domain name (FQDN) of the Client Access server on which the Microsoft Exchange Mailbox Replication service (MRS) resides. When using this parameter, all records are returned for this instance of MRS.
You can't use this parameter with the Identity or MoveRequestQueue parameters.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
MigrationMRSInstance
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ProxyToMailbox
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
The ProxyToMailbox parameter filters the results by the location of the specified mailbox (also known as proxying). You can use any value that uniquely identifies the mailbox. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Domain\Username
- Email address
- GUID
- LegacyExchangeDN
- SamAccountName
- User ID or user principal name (UPN)
Parameter properties
| Type: | MailboxIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityCloud
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ReportOnly
Applicable: Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
IdentityOnPremises
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
IdentityCloud
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
MigrationMoveRequestQueue
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.