Get-MessageTraceDetail
This cmdlet is available only in the cloud-based service.
Note
This cmdlet is replaced by the Get-MessageTraceDetailV2 cmdlet and will eventually be deprecated.
Use the Get-MessageTraceDetail cmdlet to view the message trace event details for a specific message. These detailed results are returned less quickly than the Get-MessageTrace results.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
Get-MessageTraceDetail
-MessageTraceId <Guid>
-RecipientAddress <String>
[-Action <MultiValuedProperty>]
[-EndDate <DateTime>]
[-Event <MultiValuedProperty>]
[-MessageId <String>]
[-Page <Int32>]
[-PageSize <Int32>]
[-ProbeTag <String>]
[-SenderAddress <String>]
[-StartDate <DateTime>]
[<CommonParameters>]
Description
You can use this cmdlet to search message data for the last 10 days. If you enter a time period that's older than 10 days, you get an error and the command returns no results.
To search for message data that is greater than 10 days old, use the Start-HistoricalSearch and Get-HistoricalSearch cmdlets.
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-MessageTraceDetail -MessageTraceId ae5c1219-4c90-41bf-fef5-08d837917e7c -RecipientAddress robert@contoso.com
This example retrieves detailed message trace information for messages with the message trace ID value ae5c1219-4c90-41bf-fef5-08d837917e7c that were received by robert@contoso.com.
Example 2
Get-MessageTrace -MessageTraceId 2bbad36aa4674c7ba82f4b307fff549f -SenderAddress john@contoso.com -StartDate 06/13/2018 -EndDate 06/15/2018 | Get-MessageTraceDetail
This example uses the Get-MessageTrace cmdlet to retrieve message trace information for messages with the Exchange Network Message ID value 2bbad36aa4674c7ba82f4b307fff549f sent by john@contoso.com between June 13, 2018 and June 15, 2018, and pipelines the results to the Get-MessageTraceDetail cmdlet.
Parameters
-Action
Applicable: Exchange Online, Exchange Online Protection
The Action parameter filters the report by the action taken on messages. To view the complete list of valid values for this parameter, run the command: Get-MailFilterListReport -SelectionTarget Actions. The action you specify must correspond to the report type. For example, you can only specify malware filter actions for malware reports.
You can specify multiple values separated by commas.
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EndDate
Applicable: Exchange Online, Exchange Online Protection
The EndDate parameter specifies the end date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
If don't use the StartDate and EndDate parameters, only data from the last 48 hours is returned.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Event
Applicable: Exchange Online, Exchange Online Protection
The Event parameter filters the report by the message event. The following are examples of common events:
- RECEIVE: The message was received by the service.
- SEND: The message was sent by the service.
- FAIL: The message failed to be delivered.
- DELIVER: The message was delivered to a mailbox.
- EXPAND: The message was sent to a distribution group that was expanded.
- TRANSFER: Recipients were moved to a bifurcated message because of content conversion, message recipient limits, or agents.
- DEFER: The message delivery was postponed and might be re-attempted later.
You can specify multiple values separated by commas.
Parameter properties
| Type: | MultiValuedProperty |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MessageId
Applicable: Exchange Online, Exchange Online Protection
The MessageId parameter filters the results by the Message-ID header field of the message. This value is also known as the Client ID. The format of the Message-ID depends on the messaging server that sent the message. The value should be unique for each message. However, not all messaging servers create values for the Message-ID in the same way. Be sure to include the full Message ID string (which might include angle brackets) and enclose the value in quotation marks (for example, "d9683b4c-127b-413a-ae2e-fa7dfb32c69d@DM3NAM06BG401.Eop-nam06.prod.protection.outlook.com").
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-MessageTraceId
Applicable: Exchange Online, Exchange Online Protection
The MessageTraceId parameter filters the results by the message trace ID value of the message. This GUID value is generated for every message that's processed by the system (for example, c20e0f7a-f06b-41df-fe33-08d9da155ac1).
The MessageTraceId value is also available in the output of the following cmdlets:
- Get-MailDetailATPReport
- Get-MailDetailDlpPolicyReport
- Get-MailDetailEncryptionReport
- Get-MailDetailTransportRuleReport
- Get-MessageTrace
Parameter properties
| Type: | Guid |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Page
Applicable: Exchange Online, Exchange Online Protection
The Page parameter specifies the page number of the results you want to view. Valid input for this parameter is an integer between 1 and 1000. The default value is 1.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PageSize
Applicable: Exchange Online, Exchange Online Protection
The PageSize parameter specifies the maximum number of entries per page. Valid input for this parameter is an integer between 1 and 5000. The default value is 1000.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ProbeTag
Applicable: Exchange Online, Exchange Online Protection
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RecipientAddress
Applicable: Exchange Online, Exchange Online Protection
The RecipientAddress parameter filters the results by the recipient's email address.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-SenderAddress
Applicable: Exchange Online, Exchange Online Protection
The SenderAddress parameter filters the results by the sender's email address. You can specify multiple values separated by commas.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-StartDate
Applicable: Exchange Online, Exchange Online Protection
The StartDate parameter specifies the start date of the date range.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
If don't use the StartDate and EndDate parameters, only data from the last 48 hours is returned.
Parameter properties
| Type: | DateTime |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.