Set-RemoteDomain
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
Use the Set-RemoteDomain cmdlet to configure a managed connection for a remote domain.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Default (Default)
Set-RemoteDomain
[-Identity] <RemoteDomainIdParameter>
[-AllowedOOFType <AllowedOOFType>]
[-AutoForwardEnabled <Boolean>]
[-AutoReplyEnabled <Boolean>]
[-ByteEncoderTypeFor7BitCharsets <ByteEncoderTypeFor7BitCharsetsEnum>]
[-CharacterSet <String>]
[-Confirm]
[-ContentType <ContentType>]
[-DeliveryReportEnabled <Boolean>]
[-DisplaySenderName <Boolean>]
[-DomainController <Fqdn>]
[-IsCoexistenceDomain <Boolean>]
[-IsInternal <Boolean>]
[-LineWrapSize <Unlimited>]
[-MeetingForwardNotificationEnabled <Boolean>]
[-MessageCountThreshold <Int32>]
[-Name <String>]
[-NDRDiagnosticInfoEnabled <Boolean>]
[-NDREnabled <Boolean>]
[-NonMimeCharacterSet <String>]
[-PreferredInternetCodePageForShiftJis <PreferredInternetCodePageForShiftJisEnum>]
[-RequiredCharsetCoverage <Int32>]
[-SmtpDaneMandatoryModeEnabled <Boolean>]
[-TargetDeliveryDomain <Boolean>]
[-TNEFEnabled <Boolean>]
[-TrustedMailInboundEnabled <Boolean>]
[-TrustedMailOutboundEnabled <Boolean>]
[-UseSimpleDisplayName <Boolean>]
[-WhatIf]
[<CommonParameters>]
Description
When you set a remote domain, you can control mail flow with more precision, specify message formatting and policy and specify acceptable character sets for messages sent to or received from the remote domain.
You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-RemoteDomain Contoso -AllowedOOFType None -DeliveryReportEnabled $false -TNEFEnabled $true
This example performs the following actions:
- It disables out-of-office notifications to the remote domain.
- It suppresses delivery receipts sent from clients in your organization to the remote domain.
- It enables TNEF message data on messages sent to the remote domain.
Example 2
Get-RemoteDomain | Where {$_.AutoReplyEnabled -eq $false} | Set-RemoteDomain -AutoForwardEnabled $false -NDREnabled $false
This example queries Active Directory for all remote domains for which auto replies are disabled. Using the pipelining feature, it also disables auto forwards and NDRs to those domains.
Parameters
-AllowedOOFType
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AllowedOOFType parameter specifies the type of automatic replies or out-of-office (also known as OOF) notifications than can be sent to recipients in the remote domain. Valid values are:
- External: Only automatic replies that are designated as external are sent to recipients in the remote domain. This value is the default.
- ExternalLegacy: Only external automatic replies or automatic replies that aren't designated as internal or external are sent to recipients in the remote domain.
- InternalLegacy: Only internal automatic replies or automatic replies that aren't designated as internal or external are sent to recipients in the remote domain.
- None: No automatic replies are sent to recipients in the remote domain.
The value of this parameter is affected by the value of the IsInternal parameter, and vice-versa:
- If you change the AllowedOOFType parameter to the value InternalLegacy, the IsInternal parameter is changed to the value $true.
- If you change the IsInternal parameter to the value $false, the AllowedOOFType parameter is changed to the value ExternalLegacy.
Parameter properties
| Type: | AllowedOOFType |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AutoForwardEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AutoForwardEnabled parameter specifies whether to allow messages that are auto-forwarded by client email programs in your organization. Valid values are:
- $true: Auto-forwarded messages are delivered to recipients in the remote domain. This value is the default for new remote domains that you create and the built-in remote domain named Default in Exchange Online.
- $false: Auto-forwarded messages aren't delivered to recipients in the remote domain. This value is the default for the built-in remote domain named Default in on-premises Exchange.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-AutoReplyEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The AutoReplyEnabled parameter specifies whether to allow messages that are automatic replies from client email programs in your organization (for example, automatic reply messages that are generated by rules in Outlook). Valid values are:
- $true: Automatic replies are delivered to recipients in the remote domain. This value is the default for new remote domains that you create and the built-in remote domain named Default in Exchange Online.
- $false: Automatic replies aren't delivered to recipients in the remote domain. This value is the default for the built-in remote domain named Default in on-premises Exchange.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ByteEncoderTypeFor7BitCharsets
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ByteEncoderTypeFor7BitCharsets parameter specifies the 7-bit transfer encoding method for MIME format for messages sent to this remote domain. Valid values are:
- Use7Bit: Always use default 7-bit transfer encoding for HTML and plain text.
- UseQP: Always use QP (quoted-printable) encoding for HTML and for plain text.
- UseBase64: Always use Base64 encoding for HTML and for plain text.
- UseQPHtmlDetectTextPlain: Use QP encoding for HTML and for plain text unless line wrapping is enabled in plain text. If line wrapping is enabled, use 7-bit encoding for plain text.
- UseBase64HtmlDetectTextPlain: Use Base64 encoding for HTML and for plain text, unless line wrapping is enabled in plain text. If line wrapping is enabled in plain text, use Base64 encoding for HTML, and use 7-bit encoding for plain text.
- UseQPHtml7BitTextPlain: Always use QP encoding for HTML. Always use 7-bit encoding for plain text.
- UseBase64Html7BitTextPlain: Always use Base64 encoding for HTML. Always use 7-bit encoding for plain text.
- Undefined: Always use QP encoding for HTML and plain text. This value is the default.
Parameter properties
| Type: | ByteEncoderTypeFor7BitCharsetsEnum |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CharacterSet
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The CharacterSet parameter specifies a character set for MIME messages without defined character sets that are sent from your organization to recipients in the remote domain. Valid values are:
big5, din_66003, euc-jp, euc-kr, gb18030, gb2312, hz-gb-2312, iso-2022-jp, iso-2022-kr, iso-8859-1, iso-8859-13, iso-8859-15, iso-8859-2, iso-8859-3, iso-8859-4, iso-8859-5, iso-8859-6, iso-8859-7, iso-8859-8, iso-8859-9, koi8-r, koi8-u, ks_c_5601-1987, ns_4551-1, sen_850200_b, shift_jis, utf-7, utf-8, windows-1250, windows-1251, windows-1252, windows-1253, windows-1254, windows-1255, windows-1256, windows-1257, windows-1258, windows-874, or the value $null.
The default value for the built-in remote domain named Default is iso-8859-1. The default value for new remote domains that you create is blank ($null).
This setting doesn't overwrite character sets that are already specified in outbound MIME messages.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ContentType
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The ContentType parameter specifies the outbound message content type and formatting. Valid values are:
- MimeHtmlText: Converts messages to MIME messages that use HTML formatting, unless the original message is a text message. If the original message is a text message, the outbound message is a MIME message that uses text formatting. This value is the default.
- MimeText: Converts all messages to MIME messages that use text formatting.
- MimeHtml: Converts all messages to MIME messages that use HTML formatting.
Parameter properties
| Type: | ContentType |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DeliveryReportEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The DeliveryReportEnabled parameter specifies whether to allow delivery reports from client software in your organization to recipients in the remote domain. Valid values are:
- $true: Delivery reports are delivered to recipients in the remote domain. This value is the default.
- $false: Delivery reports aren't delivered to recipients in the remote domain.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DisplaySenderName
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
Note: You should only modify this parameter under the direction of Microsoft Customer Service and Support.
The DisplaySenderName parameter specifies whether to show the sender's Display Name in the From email address for messages sent to recipients in the remote domain. Valid values are:
- $true: Sender names are displayed in messages sent to recipients in the remote domain. This value is the default.
- $false. Sender names aren't displayed in messages sent to recipients in the remote domain.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainController
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.
Parameter properties
| Type: | Fqdn |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Identity
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Identity parameter specifies the remote domain that you want to modify. You can use any value that uniquely identifies the remote domain. For example:
- Name
- Distinguished name (DN)
- GUID
Parameter properties
| Type: | RemoteDomainIdParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-IsCoexistenceDomain
Applicable: Exchange Server 2010
This parameter is available only in Exchange Server 2010.
The IsCoexistenceDomain parameter specifies whether this remote domain is used to represent your Exchange Online organization. Valid values are:
- $true: The remote domain represents your Exchange Online organization.
- $false: The remote domain doesn't represent your Exchange Online organization. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-IsInternal
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The IsInternal parameter specifies whether the recipients in the remote domain are considered to be internal recipients. Valid values are:
- $true: All transport components (for example, transport rules) treat recipients in the remote domain as internal recipients. Typically, you use this value in cross-forest deployments.
- $false: Recipients in the remote domain are treated as external recipients. This value is the default.
The value of this parameter is affected by the value of the AllowedOOFType parameter, and vice-versa:
- If you change the AllowedOOFType parameter to the value InternalLegacy, the IsInternal parameter is changed to the value $true.
- If you change the IsInternal parameter to the value $false, the AllowedOOFType parameter is changed to the value ExternalLegacy.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-LineWrapSize
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The LineWrapSize parameter specifies the line-wrap size for messages to recipients in the remote domain. Valid values are an integer from 0 through 132 or the value to unlimited. The default value is unlimited.
Parameter properties
| Type: | Unlimited |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MeetingForwardNotificationEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The MeetingForwardNotificationEnabled parameter specifies whether to enable meeting forward notifications for recipients in the remote domain. Valid values are:
- $true: Meeting requests forwarded to recipients in the remote domain generate a meeting forward notification to the meeting organizer. This value is the default.
- $false: Meeting requests forwarded to recipients in the remote domain don't generate a meeting forward notification to the meeting organizer.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-MessageCountThreshold
Applicable: Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE
This parameter is available only in on-premises Exchange.
The MessageCountThreshold parameter specifies the acceptable message count for the remote domain. If the message count exceeds this value, an event is generated that's visible using the Get-ServerHealth and Get-HealthReport cmdlets.
Valid input for this parameter is an integer. The default value is Int32 (2147483647), which indicates there is no message count threshold defined, and that the message count to the remote domain is unmonitored.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Name
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The Name parameter specifies a unique name for the remote domain object. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NDRDiagnosticInfoEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
This parameter is functional only in on-premises Exchange.
The NDRDiagnosticInfoEnabled parameter specifies whether diagnostic information is included in non-delivery reports (also known NDRs or bounce messages) that are sent to recipients the remote domain. Valid values are:
- $true: The diagnostic information of an NDR includes details that help administrators troubleshoot delivery problems. This detailed information includes internal server names. This value is the default.
- $false: The diagnostic information section in the NDR body as well as internal server headers from the attached original message headers are removed from the NDR.
This parameter is meaningful only when the value of the NDREnabled parameter is $true.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NDREnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The NDREnabled parameter specifies whether to allow non-delivery reports (also known NDRs or bounce messages) from your organization to recipients in the remote domain. Valid values are:
- $true: NDRs from your organization are sent to recipients in the remote domain. This value is the default.
- $false: NDRs from your organization aren't sent to recipients in the remote domain.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-NonMimeCharacterSet
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The NonMimeCharacterSet parameter specifies a character set for plain text messages without defined character sets that are sent from your organization to recipients in the remote domain. Valid values are:
big5, din_66003, euc-jp, euc-kr, gb18030, gb2312, hz-gb-2312, iso-2022-jp, iso-2022-kr, iso-8859-1, iso-8859-13, iso-8859-15, iso-8859-2, iso-8859-3, iso-8859-4, iso-8859-5, iso-8859-6, iso-8859-7, iso-8859-8, iso-8859-9, koi8-r, koi8-u, ks_c_5601-1987, ns_4551-1, sen_850200_b, shift_jis, utf-7, utf-8, windows-1250, windows-1251, windows-1252, windows-1253, windows-1254, windows-1255, windows-1256, windows-1257, windows-1258, windows-874, or the value $null.
The default value for the built-in remote domain named Default is iso-8859-1. The default value for new remote domains that you create is blank ($null).
This setting doesn't overwrite character sets that are already specified in outbound plain text messages.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PreferredInternetCodePageForShiftJis
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The PreferredInternetCodePageForShiftJis parameter specifies the specific code page to use for Shift JIS character encoding in messages that are sent to recipients in the remote domain. Valid values are:
- 50220: Use ISO-2022-JP codepage.
- 50221: Use ESC-2022-JP codepage.
- 50222: Use SIO-2022-JP codepage.
- Undefined: No codepage is defined. This value is the default.
Parameter properties
| Type: | PreferredInternetCodePageForShiftJisEnum |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-RequiredCharsetCoverage
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The RequiredCharsetCoverage parameter specifies a percentage threshold for characters in a message that must match to apply your organization's preferred character set before switching to automatic character set detection.
For example, if you set this parameter to 60, the preferred character sets are still used during content conversion for messages that contain characters from non-preferred character sets as long as the percentage of those characters is 40 percent or less. If the percentage of characters in a message doesn't belong to preferred character sets, Exchange analyzes the Unicode characters and automatically determines the best matching character set to use.
If recipients in the remote domain use characters that span character sets, you might want to specify a lower percentage to ensure that your organization's preferred character set is used during content conversion.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-SmtpDaneMandatoryModeEnabled
Applicable: Exchange Online
This parameter is available only in the cloud-based service.
This parameter is reserved for internal Microsoft use.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TargetDeliveryDomain
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The TargetDeliveryDomain parameter specifies whether the remote domain is used in cross-forest deployments to generate target email addresses for new mail users that represent users in the other organization (for example, all mailboxes hosted on Exchange Online are represented as mail users in your on-premises organization). Valid values are:
- $true: The remote domain is used for the target email address of mail users that represent the users in the other forest.
- $false: The remote domain isn't used for the target email address of mail users that represent the users in the other forest. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TNEFEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The TNEFEnabled parameter specifies whether Transport Neutral Encapsulation Format (TNEF) message encoding is used on messages sent to the remote domain. Valid values are:
- $true: TNEF encoding is used on all messages sent to the remote domain.
- $false: TNEF encoding isn't used on any messages sent to the remote domain.
- $null (blank): TNEF encoding isn't specified for the remote domain. This value is the default. TNEF encoding for recipients in the remote domain is controlled by the value of the UseMapiRichTextFormat parameter for any mail user or mail contact objects, the sender's per-recipient settings in Outlook, or the sender's default internet message settings in Outlook
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TrustedMailInboundEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The TrustedMailInboundEnabled parameter specifies whether messages from senders in the remote domain are treated as trusted messages. Valid values are:
- $true: Inbound messages from senders in the remote domain are considered safe and skip content filtering and recipient filtering.
- $false: Inbound messages from senders in the remote domain don't bypass content filtering and recipient filtering. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-TrustedMailOutboundEnabled
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The TrustedMailOutboundEnabled parameter specifies whether messages sent to recipients in the remote domain are treated as trusted messages. Valid values are:
- $true: Outbound messages to recipients in the remote domain are considered safe and skip content filtering and recipient filtering. We recommend that you use this value in cross-forest deployments.
- $false: Outbound messages to recipients in the remote domain don't bypass content filtering and recipient filtering. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-UseSimpleDisplayName
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The UseSimpleDisplayName parameter specifies whether the sender's simple display name is used for the From email address in messages sent to recipients in the remote domain. Valid values are:
- $true: Simple display names are used in messages sent to recipients in the remote domain. If the sender doesn't have a simple display name configured, the From email address is
EmailAddress <EmailAddress>. - $false: Simple display names aren't used in messages sent to recipients in the remote domain. This value is the default.
Parameter properties
| Type: | Boolean |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Applicable: Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Server SE, Exchange Online
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.