Share via

az network vnet tap

Note

This reference is part of the virtual-network-tap extension for the Azure CLI (version 2.61.0 or higher). The extension will automatically install the first time you run an az network vnet tap command. Learn more about extensions.

Manage virtual network taps.

Commands

Name Description Type Status
az network vnet tap create

Create a virtual network tap.

 Extension GA
az network vnet tap delete

Delete a virtual network tap.

 Extension GA
az network vnet tap list

List virtual network taps.

 Extension GA
az network vnet tap show

Get the details of a virtual network tap.

 Extension GA
az network vnet tap update

Update settings of a virtual network tap.

 Extension GA
az network vnet tap wait

Place the CLI in a waiting state until a condition is met.

 Extension GA

az network vnet tap create

Create a virtual network tap.

az network vnet tap create --destination
                           --name
                           --resource-group
                           [--location]
                           [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                           [--port]
                           [--tags]

Required Parameters

--destination

Resource ID of the destination resource.

Property Value
Parameter group: Destination Arguments
--name -n

Name of the VNet tap.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--location -l

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>.

--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--port

The VXLAN port that will receive the tapped traffic.

Property Value
Parameter group: Destination Arguments
--tags

Space-separated tags: key[=value] [key[=value] ...]. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network vnet tap delete

Delete a virtual network tap.

az network vnet tap delete [--ids]
                           [--name]
                           [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                           [--resource-group]
                           [--subscription]
                           [--yes]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name -n

Name of the VNet tap.

Property Value
Parameter group: Resource Id Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--yes -y

Do not prompt for confirmation.

Property Value
Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network vnet tap list

List virtual network taps.

az network vnet tap list [--max-items]
                         [--next-token]
                         [--resource-group]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property Value
Parameter group: Pagination Arguments
--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property Value
Parameter group: Pagination Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network vnet tap show

Get the details of a virtual network tap.

az network vnet tap show [--ids]
                         [--name]
                         [--resource-group]
                         [--subscription]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name -n

Name of the VNet tap.

Property Value
Parameter group: Resource Id Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network vnet tap update

Update settings of a virtual network tap.

az network vnet tap update [--add]
                           [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                           [--ids]
                           [--name]
                           [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                           [--remove]
                           [--resource-group]
                           [--set]
                           [--subscription]
                           [--tags]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

Property Value
Parameter group: Generic Update Arguments
--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Property Value
Parameter group: Generic Update Arguments
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--name -n

Name of the VNet tap.

Property Value
Parameter group: Resource Id Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

Property Value
Parameter group: Generic Update Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

Property Value
Parameter group: Generic Update Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--tags

Space-separated tags: key[=value] [key[=value] ...]. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az network vnet tap wait

Place the CLI in a waiting state until a condition is met.

az network vnet tap wait [--created]
                         [--custom]
                         [--deleted]
                         [--exists]
                         [--ids]
                         [--interval]
                         [--name]
                         [--resource-group]
                         [--subscription]
                         [--timeout]
                         [--updated]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property Value
Parameter group: Wait Condition Arguments
--deleted

Wait until deleted.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--exists

Wait until the resource exists.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--interval

Polling interval in seconds.

Property Value
Parameter group: Wait Condition Arguments
Default value: 30
--name -n

Name of the VNet tap.

Property Value
Parameter group: Resource Id Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--timeout

Maximum wait in seconds.

Property Value
Parameter group: Wait Condition Arguments
Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False